I have a 2005 Tracker Tundra 18 and I am experiencing a strange electrical problem.
When I plug something into the 12v outlet at the helm, a 12v inflator, in this case, it runs at about half power and the recirculating pump comes on when I turn the inflator on.
When I turn the inflator off the...
I am not looking to sell on this forum. I am just inquiring on what the value might be for a 1976 Johnson 135 outboard?
Last I knew about it it ran, but had low compression on 1 maybe 2 of they cylinders.
Everything else is in great shape.
Thanks for your input.
If you want to know; I am sadly...
I have a 18 foot 2005 Tracker Tundra that is giving me some issues with the livewell draining very slowly.
The switch to open the livewell is very hard to turn, takes both hands, but it feels like it opens.
However there is just a trickle and it slowly drains. Slowly as in it takes a week to...
I launched my boat this morning and it fired up and ran normally.
I tied it up to the dock, left it idling and went to park the truck as I have done many times.
When I returned to the boat the engine was off. I attempted to start it, but it would just turn over and over.
I checked to see if I...
I searched through many of the threads on the forum and couldn't find one that would fix my problem.
If there is one please point me in the right direction, otherwise here is my problem.
I have a 1976 Evinrude 85hp with PowerShift II controls.
Was on the lake the other day and started the...
I have a 1976 Evinrude 85 HP that I having issues with engaging the forward gear. As I attempt to put it in gear slowly it will clunk (noise as it is hitting the gears trying to engage) quite a number of times before it finally engages. If I put into gear quickly it will clunk a few times before...
I am currently running a 1975 Evinrude 80HP and whenever I shut down the engine and trailer the boat home, there is always some oil/fuel that leaks out into the area behind the transom.
I always clean it out because i don't want any of it to wash into the water next time I go out.
This also...
I have recently purchased a 1976 Evinrude 85HP and I hooked the muffs up to it to run it.
I fired it up and it was running, but it wasn't peeing.
So I shut it down.
I looked all around, but i could not find a pee hole.
I looked at another engine (1976 Johnson 135) and looks almost identical...
