Recent content by Rudles

  1. R

    Corrosion factor

    Can I use grade 8 steel bolts in place of the stainless steel bolts used to hold the parts of my jet unit (On a 1990 3 cyl 75 hp Merc) together?
  2. R

    Tilt/Trim problem

    I have searched high and low and I am unable to find a sub-topic of tilt/trim. I found a few actual posts but none answered my question. Now looking for location of the ground for the power trim/tilt motor. My 1990 75 Merc tilt/trim isn't working. I can hear the relay when I hit the switch but...
  3. R

    Jet intake

    I have heard that there is a composite intake and grate available for outboard jets. I would like to find one. My present intake is pretty well toast. Here is the info on my motor: Serial # 0C-259666 Model Year 1990 75 Hp 3 cyl Model ELHPTO E (electric Start) L (Long Shaft) H (Tiller...
  4. R

    Trying to identify year of 25 Hp

    I am trying to find what year my 25 Hp Evinrude is. I have neither serial # nor model #. The # on the Welsh Plug is63617961. Attached find a pic of the cowlings.
  5. R

    Identify year

    I have a 25 hp Evinrude I am trying to identify. Unfortunately the tag has been scuffed up too badly to recover either a model number or serial number. Is there any other way of identifying the year?
  6. R

    Mystery Mariner

    I am trying to find out what year my 25 Hp Mariner is. I have tried Maxrules and several other sites and can't find any serial numbers like mine. The serial number is A136422. It is manual start with remote throttle and steering.
  7. R

    1998 8 hp Tilt Lock

    I've searched the forum here and plowed through many posts, most have had to do with reverse lock problems. None addressed my problem. I have a 1998 8 hp Merc and the tilt lock doesn't work. When I try to tilt the motor for trailering I put the tilt lock in lock position but as soon as I start...
  8. R

    Which Control Box?

    I have a 1990 75 horse Merc with power trim. I need a control box for it and I'm wondering what model to get.
  9. R

    1990 75 Merc tiller/remote conversion

    Motor Specs: Serial # 0C-259666 Model Year 1990 Model ELHPTO I want to convert this motor from tiller steering to remote steering. I have searched and searched and I am unable to find a kit to do this. Is it even possible?
  10. R

    Fuel Flow

    I have a 1990 75 HP Merc Jet. As soon as I got it I cleaned the gas tank, replaced the fuel line, replaced the OMC filter mount with a Mercury Water Separating Filter, replaced the bulb , replaced the fuel line fitting to the motor and drained the carbs. I would like to add a small disposable...
  11. R

    Need Controls

    I need a set of controls for a 1990 75 Merc 3 cylinder. The iboat store seems geared to those who are more mechanically inclined. They show several TeleFlex boxes without cables or wiring harnesses. I have it narrowed down to needing a side mount, with trim , I see several cables so I am...
  12. R

    Possible problem

    I have a 1990 75 Merc with a jet unit. How hard should it be to turn it over grabbing the flywheel? Mine seems fairly easy to turn over. This fact plus there seems to be a slight grinding sound/feel as I turn it over.
  13. R

    Low compression?

    I have , from what I can tell, a 1990 Mercury 75 Hp with a jet unit. I have some work to do on the boat before it's water ready so I cracked the case and just out of curiosity I tried to turn the gear on top of the starter. Good news it turned.... so I grabbed the flywheel to see if I could turn...
  14. R

    How many horsepower?

    My 1966 Pacific Mariner has a 1996 Alpha One 3.0 L LX http://s676.photobucket.com/albums/vv123/Rudles_photos/?action=view&current=IMG_0004.jpg I was just wondering if anyone knew how many horsepower this engine has?:rolleyes:
  15. R

    Mercruiser cooling question

    I have a 1996 3.0 L /LX Mercruiser that has freshwater cooling in addition to saltwater cooling. At one time a po had a heater hooked up under the dash. It has since been removed and a piece of copper tube inserted in the hoses. Since I won't be using this setup I was wondering if there would be...
See more
Top