Recent content by saluscon

  1. S

    Edelbrock 1410 750 CFM carb

    I have an omc 5.7 with an edelbrock 1410 750 cfm carb. i have read that it is to large for my GM 350 and i should have a 600 or 650 cfm carb. I am also have trouble reach WOT and have noticed that the mechanical secondaries will not open. I only get about 3000 rpm at full throttle. Any suggestions?
  2. S

    Anti siphon valve

    Want to check the anti siphon valve and other lines attached to the gas tank. Do i need to remove the fuel in the tank before i do any work on it? Is there any risk in removing the fitting, sending unit or other hoses while there is fuel in the tank? Thanks.
  3. S

    omc 5.7 low rpm at wot

    Hello, I have 1990 omc 5.7 in my carver 528. at wot i can only get to 3200 rpm. I have the right prop. I have rebuilt the carb, new ignition and the timing is right. It runs great, shifts well and in idle the engine will rev above 4000 rpm. In gear, at wot, i can only get 3200 rpm. Any...
See more
Top