Current visitors

Home
Members

Scott Danforth's latest activity

Scott Danforth replied to the thread Carb rebuild question.

Go here. https://forums.iboats.com/threads/searchable-holley-carb-list.771381/ Use the search function and look for your Holley list...

Apr 5, 2025
Scott Danforth replied to the thread New boat owners leaving the hobby.

Not old ..... vintage and chrome like we are

Apr 5, 2025
Scott Danforth replied to the thread Piston Rings don´t fit, too little clearance, sits too tight.

Oops, lack of coffee this morning and sort of skimmed ADs answer The AQ271C is a 37 year old motor. Basically a 1987-1989 GM 350...

Apr 5, 2025
Scott Danforth replied to the thread Piston Rings don´t fit, too little clearance, sits too tight.

You have to file fit rings to get the gap you need. It's engine building 101.

Apr 5, 2025
Scott Danforth replied to the thread Sea Fox 226 Commander Helm Question.

Many center consoles have the helm glued and screwed to the sole

Apr 4, 2025
Scott Danforth replied to the thread no oil after cylinder head recondition.

a 2000 motor is a gen VI as you stated. its a priority main motor. since you replaced the pushrods, did you soak them in oil first...
Apr 4, 2025
Scott Danforth replied to the thread Harbor freight jack..

I have had 4 or 5 HF jacks over the years. a 3-ton, a low profile aluminum, a few of their cheep 1.5 and 2 tons. they all work for...

Apr 4, 2025
Scott Danforth replied to the thread 454 dies over 1800RPM loaded.

anti-siphon fitting should be 1/4" npt to 3/8" hose possibly

Apr 3, 2025
Scott Danforth replied to the thread Best buffing compound or cleaner wax.

Aqua buff 1000 and 2000 , followed by 3m finesse it There is also meguires cleaning wax

Apr 3, 2025
Scott Danforth replied to the thread BEWARE of Faulty 87290A4 Thermostat Housing sold on Amazon!.

GLM is a will-fit component source. will it work.....dont know will it fit.....yes

Apr 2, 2025
Scott Danforth replied to the thread Quadrajet Replacement Options.

the performer carb is not a marine carb

Apr 2, 2025
Scott Danforth replied to the thread 1981 Rinker 17 foot I/O open bow loose steering.

If the rack and pinion are sloppy, you need a new helm and cable Are you sure you are not fighting V-hull wander?

Apr 2, 2025
Scott Danforth replied to the thread Notification not working.

the email notifications have been iffy for quite a while.

Apr 1, 2025
Scott Danforth replied to the thread Paddleboard repair.

like any other fiberglass boat repair. however to keep the wood look and stripe will be a bit of a challenge. cut out the bad bits...

Apr 1, 2025
Scott Danforth reacted to jbcurt00's post in the thread Rub rail insert with Like.

Wefco and/or taco marine

Apr 1, 2025

Show older items

Home
Members

Top