Current visitors

Scott Danforth's latest activity

Scott Danforth replied to the thread simpli safe.

My mother-in-law has a whole line of ring cameras...... other than me giving her a view up my nostrils when I push the door bell, or...

Thursday at 2:08 PM
Scott Danforth replied to the thread Stringer boot recommendations?.

who's aftermarket site did you get it from. if you got it from Amazon, it will never fit. the OEM 313080 is still available...

Thursday at 11:25 AM
Scott Danforth replied to the thread Volvo penta trim relay issue.

google VF4 relay socket or VF4 relay receptacle.. the socket should be about $1.50 each and the terminals a few cents from Mouser /...

Thursday at 11:15 AM
Scott Danforth replied to the thread How to restore this 1961 hull?.

my first hydrostream was a balsa core......that was rotten

Thursday at 11:10 AM
Scott Danforth replied to the thread simpli safe.

ADT is not as good as it once was. following along out of curiosity. my first reaction is to use this:
Thursday at 8:54 AM
Scott Danforth replied to the thread 2016 Mercruiser 6.2L ECT DTS Axius Cooling System Issue.

Ted, drink one or two for us......

Wednesday at 1:38 PM
Scott Danforth replied to the thread Throttle movement but no increase in engine rpms.

15.5" is largest that fits on an alpha

Wednesday at 1:37 PM
Scott Danforth replied to the thread Volvo penta trim relay issue.

most likely you will need to cut the harness back and re-terminate. easy to do with the correct terminals. to pull the terminals out...

Wednesday at 11:55 AM
Scott Danforth reacted to alldodge's post in the thread Throttle movement but no increase in engine rpms with Like.

That's the diameter, pitch is 18

Wednesday at 11:53 AM
Scott Danforth replied to the thread Throttle movement but no increase in engine rpms.

Im thinking the pitch/diamter is backwards on the OP's statement. aluminum is 14-1/2" dia, 18P and the SS is 15-1/4" dia, 18p the...

Wednesday at 11:53 AM
Scott Danforth replied to the thread VP SX drive low oil but no sign of leak.

did you pressure test when it was empty of oil? If not, keep adding oil until its on the dipstick. then monitor. if it continues to...

Wednesday at 10:07 AM
Scott Danforth replied to the thread 4.3gxi bad temp sensor?.

all readings need to be engine running. very few are KOEO

Wednesday at 8:37 AM
Scott Danforth replied to the thread 4.3gxi bad temp sensor?.

IAC should not be open that far. usually about 40-50 the 5.0 being read at 4.23 means something is drawing down the 5.0 reference...

Wednesday at 4:54 AM
Scott Danforth replied to the thread Jimmys boat.

its just one of many of Jimmys fleet of boats. he also had a Westport that was being serviced down at Rybovich, and about 5 in the...

Wednesday at 4:52 AM
Scott Danforth replied to the thread 2016 Mercruiser 6.2L ECT DTS Axius Cooling System Issue.

the labeling is what i figured. thanks for that. and at 1100+ is why when the raw water stops flowing, the rubber exhaust couplings...

Wednesday at 4:47 AM

Show older items

Home
Members

Top

View All

View All

View All

View All

View All

View All

View All

View All

Boat Bimini Tops

Boat Covers

View All

View All

View All

View All

View All

View All

View All

Scott Danforth's latest activity

Follow Us