Current visitors

Home
Members

Scott Danforth's latest activity

Scott Danforth replied to the thread Trim Pump Bench Bleeding?.

do you have the reservoir installed? and filled? the oildyne 108 is a very very simple pump. however if water sat in the pump for a...

Jun 12, 2026
Scott Danforth replied to the thread 1971 Silverline Comoro 16.5.

generally the center was the ski locker or ski locker and a floor cooler. any limber holes cut in the stringers or bulkheads for water...

Jun 12, 2026
Scott Danforth replied to the thread [SPLASHED] I/O (Sterndrive) Conversion to Outboards.

Ted, when it comes to fairing, it's about practice, and the right tools

Jun 11, 2026
Scott Danforth reacted to tpenfield's post in the thread [SPLASHED] I/O (Sterndrive) Conversion to Outboards with Like.

Gelcoat day . . . My first time spraying gelcoat :unsure: I put a coat of VE primer on a couple of days ago and today did the gelcoat...

Jun 11, 2026
Scott Danforth replied to the thread Engine flooded?.

could be a stuck float or needle/seat ($6 part) could be fuel coming up the clear hose from the fuel pump indicating a ruptured fuel...

Jun 11, 2026
Scott Danforth replied to the thread Artificial Intelligence.

be cautious. most AI chatbots pull data from social media vs authentic sources. That includes places like youtube, facebook, etc...

Jun 11, 2026
Scott Danforth replied to the thread Looking for transom molding cover or trim. Any suggestions on where I can it..

looks like vacuum formed ABS. I would get a sheet of 0.090" 5052 aluminum and form a new one.

Jun 11, 2026
Scott Danforth replied to the thread Merc 350 with power steering issues.

with the actuator removed, does the drive turn easy with one finger on the outside? did you orient the cable correctly for the pilot...

Jun 11, 2026
Scott Danforth replied to the thread 1971 Silverline Comoro 16.5.

I agree with Mike, dont overthink the stringers. I personally would use 3/4" plywood and round over the ends with a router. no need...

Jun 11, 2026
Scott Danforth reacted to MikeSchinlaub's post in the thread 1971 Silverline Comoro 16.5 with Like.

I would glass the whole stringer and floor back in. You have to fill all those cavities with floatation foam once the floor is back in...

Jun 11, 2026
Scott Danforth replied to the thread 1971 Silverline Comoro 16.5.

There were a few powerglides in front of a standard outdrive boats many many years ago. The motor was midships One of the large Volvo...

Jun 11, 2026
Scott Danforth reacted to dingbat's post in the thread Towing Coverage Progressive or Boat US with Like.

I’ve had both. Unless Progressive has changed their policy, they only pay/cover the first $500. My last tow was estimated by the...

Jun 10, 2026
Scott Danforth replied to the thread 1971 Silverline Comoro 16.5.

if you decide to uncap the deck, make a cradle to hold the deck shape, remove the rubrail, then remove the screws, and using ratchet...

Jun 10, 2026
Scott Danforth replied to the thread 85 Crestliner Nordic floor replacement.

No, once the OTF is dried and varnished, the glue will stick

Jun 10, 2026
Scott Danforth replied to the thread 1971 Silverline Comoro 16.5.

You have to pull the motor and drive before going any further Take pictures and measurements of the stringer system Expect to pay $3k...

Jun 10, 2026

Show older items

Home
Members

Top