Scott06's latest activity

  • Scott06
    Scott06 replied to the thread 2002 crownline 305 mercruiser.
    My replacement long block came with the sensor but my engine being carbed does not use it. you may have to buy the sensor and install it...
  • Scott06
    Scott06 replied to the thread 3.0L differences.
    I have used magnets to hold the mat to the oil pan. Seems to work well on my 65 pontiac
  • Scott06
    Scott06 replied to the thread Mercruiser 470 to Mercruiser 140 Swap Question.
    Yes on flywheel cover (aka bellhousing) The 470 uses a standard Chevy bolt pattern. not sure on the coupler probably best to cross check...
  • Scott06
    Scott06 replied to the thread 3.0L differences.
    different dealer networks so sort of makes sense. Looks like a 3.0 of that vintage uses and o ring and splash shield set up. Same as on...
  • Scott06
    Scott06 replied to the thread 3.0L differences.
    the difference is the flywheel size and coupler style. Older engines has 2 piece rms and 12 5/8" flywheel, later are one piece RMS and...
  • Scott06
    Scott06 replied to the thread Water in gear oil... (Not a great day).
    I think you are good to go. I made my own pressure tester as well used a metal threaded fitting off an old lube pump as well, hose and a...
  • Scott06
    Scott06 replied to the thread 2003 Crownline oil reservoir fitting.
    is that the exterior one that plugs into the upper vent screw?
  • Scott06
    Scott06 replied to the thread 2003 Crownline oil reservoir fitting.
    will be no issue, some of the Gen 2s did not have the revesior. when I had my gen 1 years ago I would frequently check the level (upper...
  • Scott06
    Scott06 replied to the thread Knocking sound from my Alpha One Gen 2.
    yep a cut off washing machine hose works great but just the hose end works ok , just need to tie it off so it stays there or have...
  • Scott06
    Scott06 replied to the thread 2003 Crownline oil reservoir fitting.
    it looks like that end of the hose goes into a pipe thread x barbed fitting so no reason a pipe plug cant go in there. could also put a...
  • Scott06
    Scott06 replied to the thread Knocking sound from my Alpha One Gen 2.
    Agree with others take the cap off and look split the drive. as a sanity check maybe run the engine with drive off to verify the noise...
  • Scott06
    Scott06 replied to the thread Knocking sound from my Alpha One Gen 2.
    Hard to tell from here but my first place to start would be pull the drive and check gimbal and ujoints. Also drain drive lube and check...
  • Scott06
    Scott06 replied to the thread Strange Previous Owner Hack Job..?.
    I think the main difference between a TB 4 and 5 is the active timing where it constantly adds advance, watching for how much rpm...
  • Scott06
    Scott06 replied to the thread Strange Previous Owner Hack Job..?.
    not all TBV setups used a knock sensor. I dont think I have ever seen one on a 4.3 or carbed 5.0's I wouldnt be concerned at all if...
  • Scott06
    Scott06 replied to the thread Strange Previous Owner Hack Job..?.
    With spliced connections did someone swap in a delco est ? Or it is a TB maybe spliced a differnt generation igntion module as many are...
Show older items
Top