SeaRayboater95's latest activity

Ok, found something new. Pressurized cooling system again and can hear air moving in the intake through the carb. I guess pull intake...

For flushing find what ever is cheapest, your not going to put the motor under load so no issue. Do agree lower weight like 10w30, could...

super tech or rotella what ever is cheapest. you can drop 3 qts in and let it idle get a couple filters and gallons of oil.

One more question for now. Do I need to remove those brand new exhaust flippers while running the engine for 30 seconds with no water...

Thanks, Ken

Mornin' evrybody. Off to get some oil to fliush this motor. Is there a preferred grade to flush with. I would think a thinner grade like...

Your doing good Pressurize to 15 psi to where it will hold and maintain. If it holds and then good

Ok. I guess I'll cut that hose off and pressure test from there. Looks like it rubbed through on the water pump belt. The previous owner...

Yes, in fresh water. I dont think they have ever been off. Customer has doe zero maintenance since he has owned the boat. I replaced all...

Maybe I'll cut that hose off above the hole and test again. I hope I can still get that hose. It needs to be replaced anyway. I didn't...

I had a proper radiator test kit with a hand pump. Pump it up to 10lbs and I could see really small bubbles coming from under the tape...

Ok, I've done a bit of exploring since we last talked. I've drained the oil and filter will screen the first oil change. Forgot to clean...

Just an update. Removed drive and everything looked good. Readjusted cables, took the switch out again and clean it up. Lubed...

I usually dump the oil, put in the cheapest oil you can get along with the filter. Add a half can of seafoam, run it for a couple...

Is there and order to check these different possibilities? Is it visual, or do I need to pressure test? I remember from years ago that...