Is the water pump and impeller for an omc outdrive located in the upper assembly or lower?, and what do I need to do about changing it out? any drawings, diagrams would be helpful..<br />Also, is there a concern that the impeller could be broken off(pieces of it) and blocking or obstucting some...
I recently put a thermostat in a chev 2.5L 4cylinder with an omc outdrive, my question is when does the water suppose to come out of the two holes located on the side of the lower foot assembly? should it come out when you hook up a hose at idle off the lake at low rpm's or does it come out only...
I HAVE A 68 LARSON WITH A MERCRUISER INBOARD/OUTBOARD, WHAT PROP MODEL OR SIZE CAN I REPLACE IT WITH.? WHICH WOULD GIVE GOOD PERFORMANCE AND GET ON PLANE QUICKER ?
I HAVE A 1968 LARSON WITH A CHEVROLET 4 CYLINDER 2.5L 153CID WHAT IS THE POINT SETTING GAP FOR DISTRIBUTOR, ALSO I AM HAVING TROUBLE WITH THE BOAT SLOWING DOWN AFTER 5 OR TEN MINUTES CRUISE FROM 4000 RPM TO BETWEEN 2500 AND 3000RPM, SPEED15TO 20MPH COULD THIS BE A COIL, OR FUEL SYSTEM PROBLEM...
I HAVE 1968 LARSON 166 WITH A 4CYLINDER CHEV 2.5L MOTOR: MY PROBLEM IS I CAN GIVE THE MOTOR THROTTLE AND IT RUNS FINE AT FIRST, UP TO 4000RPM, AND THEN IT STARTS SLOWING DOWN, THE RPM DROPS TO BETWEEN 2500 AND 3000 AND THE BOAT SEEMS TO BE GOING ABOUT 15 TO 20 MILES AN HOUR. ONCE YOU LET IS SIT...
