Re: 89 Suzuki DT 75 oil leak
An update and questions, cause we shade tree garage mechanics do not have the equipment or tech skills for these press rod cranks so decided to take the motor to a rebuild shop due to the clacking when rocking the crank. It may or may not have been necessary. what...
89 DT 75 leaking oil down the driveshaft housing both outside and in. Under the hood is clean, no oil found around the pump. Plan to drop the lower unit and look at the seals. Any idea? thanks Skeeter#2
Anybody know how to check these? Or how to test the oil pump? The #3 cycl line has a single oil check valuve on the line from the pump. We cleaned the carb's then added 8oz oil to 6gal fuel for the test on the muffs and for precaution. After mild testing, checked #3 plug seems light to dry of...
after carb cleaning, any idea how to set the pump linkage to get the right fuel oil ratio mix? Do these pumps pump oil through even at the lowest setting? Will this be the setting for idle to sync the mix with the carbs?
Thanks for your help...
Signals at high speed 3000 rpm and up, will turn off as soon as rpm is reduced even a little only to come on again after a short while.Does not seem to run hot to the touch. can the thermostat open too late, (at boiling point opens wide when tested on the stove in water) and cause the pressure...
