Recent content by Smaj

  1. S

    Carburetor's

    Thank you Sir. That is exactly who I was going to contact in the morning. Thank you the reply much appreciated.
  2. S

    Carburetor's

    Hello everyone, Well the carbs got put on and with all back together it started up and ran fine, (for about 10 Minutes) then died. I had no spark, and in testing I traced it back, found burnt wires from the stator. In testing the stator, I could not get a reading whatsoever using the Klein Ohm...
  3. S

    Carburetor's

    asked and answered.....?
  4. S

    Carburetor's

    Gentleman, Sorry for the confusion but if you read the post, it stated after grounding the plug wires and then turn the ignition. Nothing about starting it up and running. Mr. Faztbullet The timing you mention is that for your boats or a suggestion for mine?
  5. S

    Carburetor's

    I thank you so much for your help. I will let you know when all is said and done. thanks again!
  6. S

    Carburetor's

    Chris, Dave, Got it. And Thank you for the manual lookup. I did look in the manual and on page 12 of the manual under timing it gives the same information. 2*ATDC - 6*BTDC. So once again I find myself asking the same question. At what degree should my timing be set at? When I ground the...
  7. S

    Carburetor's

    Hello again everyone, Does anyone possibly have a mercury manual for a 2002 mercury 90hp ELPTO 2 stroke outboard that they could share the timing specifications with me? any help would be appreciated. Thank you
  8. S

    Carburetor's

    Chris1956, No it's not a mercury manual, it is the Seloc. I will try to find the timing settings from another source and see what I can come up with. I want to say that the timing is probably at the 2*ATDC but will make sure before trying anything. I think you for your help. I will keep you...
  9. S

    Carburetor's

    Well I could be reading it wrong but don't think so. Looking at the manual right now under tune-up specs, Idle timing (NOT idle pickup timing) 90 HP states 2* ATDC - 6* BTDC. So I guess my question is am I supposed to set the timing anywhere in between the 2* ATDC - 6* BTDC ?
  10. S

    Carburetor's

    Morning everyone, Well the Carbs are rebuilt and installed. But I also like to check the timing prior to trying to start. I understand how to do it, but I am confused about the timing specs. The manual states that the Idle timing is 2*ATDC - 6* BTDC and the WOT timing shows 20*BTDC. The WOT...
  11. S

    Carburetor's

    I want to thank all for the information I was aware of the 3 part numbers, and was made aware of top middle bottom by Thom W due to the fuel line connection set up. The Nipple as to Dave1027. Thank you
  12. S

    Carburetor's

    Yes Sir I am aware of that. That was the main reason for asking about the carbs if they were the exact same. I was going to switch it up say 1 to 3 and 3 to 1 and see it the problem was the same. but was suggested not to switch them up. go with top middle and bottom.
  13. S

    Carburetor's

    racerone, are you saying that there is a fuel pump diaphragm on the carb? I don't see anything that list or shows anything like that. but if we are talking about the actual fuel pump 14360A71 and if so again if the fuel is pumped into the carb from a daisy chain fuel line to the carbs how...
  14. S

    Carburetor's

    I will check the fuel pump diaphragm, but doesn't make sense is the other two carbs and cylinders are firing great that the third wouldn't be getting fuel also but 2 out of 3 getting gas when the line coming from the pump is a daisy chain. could be wrong but I will check. Thank you and as to...
  15. S

    Carburetor's

    Thank you for the information. I can do that and makes sense. The next question I have is in ordering the repair kit 8112231 is shows 2 gaskets of the same kind. The carb only has one. Am I missing something? the one's in the middle I am talking about and it goes in the upper cover plate where...
See more
Top