It appears the I am having a misfire. What should my spark look like on the plugs? These are NGK BUHW surface type plugs and I am seeing a very very small, thin, white spark. It appears weak on all 3 plugs but the weakest is cyl #1 and better on cyl #2 and even better on cyl #3 but all seem...
1982 Mercury 70HP 3-Cylinder 2-Stroke SN# 6164457
This engine has a sticker on it that states:
MAX Advance timing is 23* BTDC @ 5500rpm. or 27* cranking speed of 300rpm.
However this engine cranks at 600 rpm. What would be the correct max advance ignition timing be cranking @ 600rpm?
When performing a spark test I get a thin white spark arc across a spark tester set to a 7/16 inch gap on all 3 cylinders. Should I be seeing something more than this? I read somewhere a wide blue arc.
1982 70HP 3Cyl 2Carb. with WOT problem.
Thanks
Does anyone have the correct procedure for a Link & Sync of a 1982 70hp (3cyl., 2 Carb) Mercury outboard, serial number 6164457? I have tried some of the link and sync procedures but I am getting poor results. My OEM service manual does not contain the full procedure such as primary pickup...
I have a 1982 Mercury 70hp 3cyl (SN#6164457)and I replaced the impeller a month ago and its already trashed. Every fin broke off at the base of the impeller. This was not installed backwards. The impeller was installed turning the drive shaft clockwise. But what I noticed was the impeller rubber...
I have a 1985 Mercury O/B 70HP and I can't seem to achive 5500rpm @ WOT and I need some help.
This is what I have done so far.
Last season I bent my prop shaft so I replaced it and the prop (10p) in november but didnt test it until this spring.
Started motor w/muffs in my driveway and let...
