1992 Evinrude 40hp -I put some stabil in my fuel, but it was after the engine had already set about a month. Engine sounds almost like your shifting gears on a bike. seems to rev up a little and then level out. It doesnt sound that bad. Thought I might have too much stabil in the fuel. Im...
1992 evinrude 40 - Put timeing gun on plugs, top plug not fireing. Engine is running on one cylinder. I have a clymer manual but I am haveing a problem finding info on how to troubleshoot external coil. I was told that you couldnt troubleshoot the power pack. Same guy said the power pack for...
Do you have to have any special tools besides a multi meter to test a power pack? And how would you test it if not. I found that my wires to the power pack had been nearly cut in two by the throttle assembly, I spliced the wires back together but I was wondering if the power pack might not be...
evinrude 40hp 1992- Engine is real clean, had it rebuilt about 2 yrs ago. Vro quit working and caused some damage (removed that feature) just mix oil in tank now. Ran great until a couple of months ago. Now at full throttle you can run all day at about 10mph. Got a little bit of white...
Under the stator there is a set of wires that run down next to the throttle, make a plug connection and wrap under the back of the motor. The throttle had rubbed these wires(red white and green wires) almost into. As soon as I respliced them the motor cranked up without hessitation (had been...
When I replaced my plugs I notice that the lower plug was fouled and had some oil on the threads of the housing. What might this indicate. And which carb is the #1 carb the top or the bottom one, thanks, Jake (1992 evinrude 40)
Refering to tightening the bolts on a TR carb 12-16in-lbs (1.3-1.8 N.m)/ 1992 evinrude 40/ Question-what does TR stand for and what is (1.3-1.8 N.m) talking about?
What does the term decarbing mean and what is sea foam or deep creep, what are the small dime size screens in the side of my carbs for, what is a reed block? Just a few questions that seem a little dumb but if you tell me once I wont ask twice. Thanks, Jake (1992 evinrude 40)
It smokes a little when first cranked, but my main problem is that with the throttle at full power I'm only getting about 1/4 power. I have put in new plugs and changed the inline filter. It diddnt help. I just purchased a o&m manual but I could use a point in the right direction on what to...
