1988 175 evinrude....runs great at idle..... at wot motor needs more fuel...i can push the choke and feel the fuel working... carbs are clean....any ideas?
I have A 1990 V4 120 horse power evinrude. Where the starter connects to the motor, the top bracket where the bolt goes from front to back is broken. There is a little meat in the front of the tube and meat in the back, enough to secure the starter. It seems like the tube is on a small angle...
i HAVE A 89, 85 HORSE FORCE. tHIS MOTOR IS SO HARD TO DTEER. i'VE DISCONECTED THE CABLE TO SEE IF IT WAS THE CABLE BUT THE CABLE MOVES FINE. iT HAS TO BE THE MOTOR ITSELF. I'VE TRIED TO GREASE<br />THE STEERING ROD BUT IT DOESN'T WANT TO TAKE THE GREASE IT SEEMS LIKE THERE IS NO ROOM FOR THE...
I'm trying to figure something out, With the motor in the lowest position where should the fin be in respect to the bottom of the transom. <br />even, an inch above, or an inch below?
I'm trying to figure something out, With the motor in the lowest position where should the fin be in respect to the bottom of the transom. <br />even, an inch above, or an inch below?
