Winter Project Rebuilding 1986 5.7 L 260 HP Motor Camshaft & Ignition/ distribitor ??
Looking for some advive experience on camshaft selection and whats need to be donttrise the rev limiter on my stock ignition ? or replace the distribitor ?
Compression is good 148-152 PSI motor has about 350...
Here's what I have 1986 OMC 5.7 Liter 260 HP, will be using q Jet stock intake and exhaust,
Here the stock spec's I found here on iboats and else were on line would like to Verify ;
Intake .390" Lift 195 degrees duration @ 050"
Exhaust .410" lift 202 degrees duration @ .050"
LSA 112 degrees...
Trying to find out what this prop is ? Part # 48-825900 Vensura 4 blade , I Can't find the parts # to match the name on the prop. Second parts is what prop do I need ?
Boat Regal 2200 bowrider( 3700 # per manual )Mec 350 Mag / Bravo 1 Drive 1.65 ratio runs 52 mph on gps and 5500 rpm
See...
Looking at a couple of used 2200 bowriders one w/ VP 280hp - SX and one with Merc 350 mag- bravo 1
Whats your thoughts on this hull ?? What kind of top speed on GPS are you getting ??
I have friend that we travel with with much bigger boats & Motors so wondering what she do top end ??
Thanks
I am looking at buying an 2008 Regal 2200 w/ Merc 350 Mag 300 HP serial no. 1A11921B and wanted to know if this motor has change in the newer model years through 2012, or if there any model years to stay away from ? Differnt performance ? or are all the 350 Mags the same the last few years...
Looking at Buying a 2008 Regal 2200 w/ RS package whats the HP of the 5.7 L GI SX motor they are claiming 300 HP
The built sheet (window sticker) list it at 280 HP ?
Also if it is 280 HP when did Volvo go to 300 HP ? I also found an 2010 Regal 2200 listed with a Volvo 300 HP motor.
I...
I have an 1986 5.7 liter 4 barrel OMC with the old style manifilds and elbows, anyone coverted to the newer volvo penta exhaust manifold / riser combo ? does anyone sell coversions adapters to get from the riser to the stock factory "Y" pipe ?? Any help would be great and I have one that has a...
I have a 1987 Winner Escape with a 1986 model year 5.7 liter 4V motor, here my problems;
1) Runs at 180 degrees and upto 190 degrees if run WOT (4500 rpm w/ 17 pitch prop) for a few minutes .
I have fix and tried the following;
New thermosat (OMC 160 degree), new gauge and sensor veriftied...
