Removed the left side valve cover and all the rocker nuts are loose...
I set them at zero lash + 1.5 turns when I installed them.
I believe the nuts should be stover style? These have no lock left..
If I set zero lash on #1 at TDC and check compression on #1 I get 150psi.
If I do zero lash...
Bought boat with motor out, installed new head gaskets, intake gaskets, pressure tested exhaust with air. All good. Got boat running, ran ok...impeller in leg was not working replaced...
Boat ran. Installed thermostat as I forgot to when replacing manifold gaskets...Had someone looking to buy...
I cannot find the drain plug in my Alpha 1 drive. Serial number 0FC82120
I know where it should be but it's not there..
How do I drain the oil from the lower unit? Thanks
I bought a 93 Maxum recently with engine out and partially disassembled. I have got it back together except for the front area...basically the power steering pump and fresh water cooling heat exchanger mounting. I believe I have all the parts but they came in several boxes..;0 If you have a...
Boat is freshwater cooled and antifreeze tests good. Small drain valves are installed in the exhaust manifolds to drain raw water..I am up in BC and yes it gets cold up here but this boats was stored indoors and winterized by a marina. (I know the old owner and see the boat in his shop every...
Bought a 93 maxum with a 4.3..
Engine was replaced 3 years ago. New engine got hydro locked and previous owner pulled it and removed intake. Been sitting in his shop for 2 years.
Puller off risers and exhaust manifolds, evidence of water in cylinder 5 and 6. Pulled heads and no blown...
