Have a mercruiser inboard/outboard with a pre alpha drive. There is a block on the underside of the outdrive that has two hydralic lines coming in from the pump and then 4 on the outside leading to the trim cylinders. Well on the inside where the two lines from the pump come it it always starts...
Have an Egg Harbor with twin 350 Crusaders I'm working on and am having problems with the port engine. At first thought it was the fuel filters because they were very clogged but after replacing them it still wont work. When you start it as long as you are holding the starter button it sounds...
i have a 20' wellcraft with an I/O and the hydrolic lines coming from the cylinders that raise and lower the outdrive come into a bracket that attaches to the two that come from the inside fo the boat and it keeps corroading around the two that are on the sid eof the bracket that does not go in...
I have an 35' egg harbor and quite often i check the batteries and they are all dried up and will start to lose their charge. what might be causing this problem and how might i fix it?
Sorry for anyone i have offended on this forum. I was a little out of it during that post. Please continue to help me out in the future with everones insight into the problems i come across. Sorry to you all!
I posted this once already but did not get much response. Hope to get more info this time. I have an 87 35" Egg Harbor with Crusader 350 inboard motors and my exhast hoses in the engine room keep breaking open on he top. It had happened one before but i figured it was just old hose and have...
I have a 14' Carolina Skiff with a 25 Johnson remote and with more than two people in the boat it will go nowhere. We borrowed an old 25 Evinrude from a friend and it flew with tree people. The Evinrude had the same length shaft and the same pitch prop but did much better. I have taken the boat...
I have a 35" Egg Harbor with inboard motors and m exhast hoses in the engine room keep breaking open. It had happened one before but i figured it was just old hose and have replaced both hoses. With less than 10 hours of run time on the new hose both of them burst in the same day. It was so bad...
