Recent content by tavo83

  1. T

    Serial number through diagnostic tool?

    Yep its an MPI from 2006..well according to the previous owner.
  2. T

    Serial number through diagnostic tool?

    Hi. Does anyone know if its possible to obtain the engine serial number through a diagnostic tool?
  3. T

    Different risers and elbows

    do you have a link to one?
  4. T

    Different risers and elbows

    Found the imprinted riser number. 864929-C. Tried searching for it but did not find a good match that tells me if its A1 or A3.
  5. T

    Different risers and elbows

    true, but originally the engine came with wet joint. and about 10 years ago someone did a conversion to dry joint. Think im going to remove the whole system after the boat is out of water and check all the measurements and partnumbers. the elbows have part number imprinted, do you know if its...
  6. T

    Different risers and elbows

    https://www.glmmarine.com/pdf/Manifold_Catalog.pdf looking at the OEM numbers. Looking at your links the only difference is this: 864929A1 "Fits 2002‑2004 Sterndrive V‑6 & V‑8 (305, 350 & 377 cid) non‑EC engines serial numbers 0M615000‑0W309999." 864929A3 "2004‑2016 sterndrive V‑6 & V‑8 (305...
  7. T

    Different risers and elbows

    Ah great! Looking around in a catalog that i found A1 is listed under 7 degree elbow and A3 is listed under 14 degree elbow. but i guess its the same hight so should not make a difference as long as i use the correct elbow witch in this case would be the 7 degree one.
  8. T

    Different risers and elbows

    Anyone know the difference between spacer/ricer 864929A1 and 864929A3. Looks the same to me :)
  9. T

    Different risers and elbows

    Hi. Im looking into buying new manifolds, risers and elbows. The current setup is. Manifold - 3” riser/spacer - 6,75” elbow model: 864309T01 ( now replaced with 864309T02 ) Found a good package with the newer model of elbow and manifold. New setup would be: Manifold - 1,7” riser - 8,15” elbow...
  10. T

    Cold riser vs Warm riser

    thank you!
  11. T

    Cold riser vs Warm riser

    Hi! New to this forum and to sterndrive engines. This fall/spring i will be replacing the manifolds and elbows on my 383 mpi from 2006. Although the service manual states that its a MX 6.2 (guess its the same) From the looks of it the system thats installed today is a wam riser setup, but in...
See more
Top