Recent content by toddr5516

  1. T

    looking at a 173 cc angler

    I've been looking at this boat for awhile. it has a 70 four stroke on the back. Today I was going to the internet and I saw where an owner was totally displeased with his and it got me reconsidering about purchasing from this manufacture. The price is 4 to 5 grand less than the others is what...
  2. T

    transom replacement

    i am going to replace part of my flooring and have noticed that the transom is rotted. the 1974 15ft. sticksteer cost me 400.00 with chrysler 45hp motor, trolling motor .please don't say make an ancher out of it. now i plan on doing this myself and would like some advice or a site that will show...
  3. T

    switched props on motor now difference n speed

    i have a 1974@ 45hp model 457hf . little boat w/ stick steer 15ft. , it used to go f a s t ... . burnt the head gasket and bent the prop. switched the prop and headgasket. the new prop. is smaller in diameter maybe pitch also. i have no rpm guage or speedameter. i can see the wake is closer...
  4. T

    1974 45hp prop problem

    i bent the prop that came with my boat which is a 1974 15ft. tidecraft . stick steer what is the proper size and pitch that i need for this motor?
  5. T

    ipc for 150 ficht fuel injectors

    I'm wanting to get an illistrated part breakdown of a fuel injector for 1999 evenrude 150 ficht motor , can anyone show me a diagram of this injector?
  6. T

    fuel consumption 45hp

    i have a 1974 15'tidecraft sticksteer with a 45chrysler. the boat seems to run fine at all ranges. If i put the motor in reverse and gas it i sometimes notice a plume of smoke , other than that i believe it runs pretty good for this age of boat. i seem to get approx. 4 gallons an hour in power...
  7. T

    150 ficht engine evenrude?

    anyone ever fool much with these engines or rebuild the fuel injectors?
  8. T

    intake air filter

    does a 1973 chrysler 45hp supposed to have an air filter?
  9. T

    modify trolling motor

    I have a foot steer trolling motor and I would like to eliminate the power switchs on the foot control and locate it to the side of the boat.Locate the proper rheostat and install it so that my foot does'nt have to be on the foot control to give it power .I'd like to know what type of rheostat...
  10. T

    rust on spark plug

    I seem to recall reading in one of these forums that if rust is built up on the spark plug that it means the plug is not sparking well. I have a '73 chrysler 45 hp and the lower plug is corroded up , but the upper plug looks fine and the motor seems to be running fine . I've never changed the...
  11. T

    pull out or push through?

    http://thumbp1.mail.mud.yahoo.com/tn?sid=1384103207&mid=AOLIjkQAAPtcRJcjFAON4Ur87qA&partid=2&f=312&fid=Inbox:
Top