Recent content by TravG

  1. T

    Only one full power run each day?!

    I’ve a 1986 225 HP Evinrude. Once started, I can get one good full power run. After that, especially after shutting down, the engine will lag and stall when I attempt to go to full throttle. I suspect a faulty power pack, but am looking for other recommendations. History: just replaced...
  2. T

    Electric ignition conversion and spark plug gap

    I have a late 80s GM 350 in my i/o boat. Years ago I removed the points and installed an electronic ignition conversion kit. I installed new plugs this year before starting, and gapped them at .028" per the manual. When I removed the old plugs, I noticed they were all at the plug...
  3. T

    V6 looper powerhead compatibility

    There doesn?t seem to be a good reference to understand compatibility of installing a powerhead from one year onto a midsection/lower unit of a different year. The best I can find is to check the part number of the exhaust housing adapter. If they match, it should be a simple swap. If they...
  4. T

    Barefoot on non-skid painted surface?

    This is a pretty easy, basic question. I just replaced the deck on my boat and am debating whether I should put down carpet or paint it with Interlux/Petit non-skid. It's a 19' bowrider and we'll be barefoot most of the time. I've always preferred a gelcoat, molded non-skid deck the...
  5. T

    Jet ski won't turn over - help needed with electrical issue

    Re: Jet ski won't turn over - help needed with electrical issue See wiring diagram attached.
  6. T

    Jet ski won't turn over - help needed with electrical issue

    I've a 1995 Kawasaki Zxi jet ski and it's driving me crazy! When I try starting, it won't turn over, though it ran fine last year. The starter is fine (verified by bypassing the relay), the starter relay works (verified by removing and hooking the battery directly to the leads), but something...
  7. T

    Carburetor intake needed on Force 40 HP?

    I've a 1996 Force 40 hp outboard. It's been running a bit rough lately and I want to rule out the easy things first. Since I bought it a year ago, the carburetor has never had an intake filter/cover. It opens straight into the cowling. There are 3 screw holes, indicating there should be...
  8. T

    Compression question

    I've a 1995 Kawasaki Zxi 750 that's been driving me nuts. The engine was overhauled, the carb completely gone through, and general touch-up here and there. The work was partially done by me and partially by the previous owner. The problem is that it won't start. I've checked the fuel system...
  9. T

    Mounting on engine stand - should I remove flywheel first?

    I've lifted the Ford 302 out of my boat and plan to attach it to an engine stand. The engine is seized from sitting too long. I've experience working on motorcycle engines, but this is my first larger sized one. Should I pull the flywheel off the engine before mounting it on the stand? I can...
  10. T

    Hoist points: alternative to the flywheel puller?

    I've a 1991 Johnson 175 that I need to lift out of the back of my pickup truck. I'm wondering if there's a way I can lift it out without buying a flywheel puller. Looks like they're $75 on ebay and would take a while to fabricate by hand. Any suggestions for other options for hoisting? I...
  11. T

    Small outboard fuel filter constraining flow?

    I have a 3hp Sears Outboard from 1971. It runs like a champ, when it gets fuel. Being that the tank is quite old, I wanted to install an inline filter between the built in tank and the carb, the old one in the fuel petcock had broken. I bought one of those paper filters from the hardware...
  12. T

    Liveaboard show on tv?

    I remember watching a show on TV once about a family of liveaboards sailing all over the world. It was filmed by the family on their own camcorders, so it wasn't a big production show, but it was still a good watch. Does anyone know what I'm talking about, or know of anything similar? It...
  13. T

    Lancer brand sailboats

    Does anyone know anything about Lancer sailboats? I couldn't find much on the web about them and I'm wondering if they are a reputable manufacturer. I'm thinking about buying a 25 footer, but don't want to waste my time driving to see it if they're known for poor quality. Thanks!
  14. T

    How to decide on required towing capacity

    Most posts in this forum seem to compare specific engines, trucks, hitches, etc. Taking the brand out of it, I'd like to hear about your experience towing. Is the listed towing capacity of a vehicle something to trust (assuming you know what you're doing, correct hitch, brakes, etc)? For...
See more
Top