As the title states, I have an '89 Mariner that I've been battling an issue with the alarm always going off. It's not always a predictable pattern, but I'll base my results from today's start and idle.
When I turn the ignition on, but not crank, it's usually a solid beep. Sometimes it'll stay...
Last fall, I had a bit of a mishap with ramping a tree in the middle of the river which dinged up the prop and skeg. I've since had the prop repaired, but the skeg still needs works. I ended up getting a Panther skeg guard, but the additional thickness and lack of torque wedge made a noticeable...
Last fall on the water, I noticed had very little (<2 psi) water pressure at idle and couldn't get 10psi unless I had the RPMs up and moving fairly quickly. I got around to taking the lower unit off and believe I found the culprit. I think the gasket had a tear in it which was causing the...
Re: Johnson 2400 Pedal Steering Cable
Here's 1 picture I have. It was my dad's Norris Craft. I want to say it's an 85. 17.5'. Has a Mariner 200 according to the title, but 150 stickers. I guess that's how he fished in a lower class? It's been in storage for a couple of years and I've had it on...
The steering cable currently on the trolling motor has rusted over the year and is no longer functional. I've looked on the cable itself, but can't find a part number. The trolling motor itself is a Johnson 2400. Does anyone know where I can find a replacement cable, or if any generic cable with...
Knowing very little about this engine, hopefully I can provide enough information to get the products I need. The steering on the boat was completely locked up, but I noticed that when turning the wheel, the lower cable would force itself out of the rotary guide. I removed the guide and noticed...
