thanks for the answers, I chose the reed valves to lie completely or with a very small gap of only 0.05mm. I saw somewhere on youtube that a man who serviced his engine older than mine was paying attention to the maximum height at which the valves are allowed to open. mostly I will see that...
hello to all forums. I decided to completely inspect my mercury 50 1977 9136284 and I encountered a problem with reed valves. a lot of them don't close completely, so I chose good reeds from the old engine and replaced them. now the question remains at what height the reed stop is adjusted as a...
mercury 50 from 1977, the problem is that the lower cylinder draws in a little water. I replaced the exhaust baffle and made gaskets of 1.5 mm gasket, so now the edges of the baffle do not fit 100% on the cylinders, there is a gap of say 1 mm, maybe a little more. Is this perhaps the reason why...
https://www.dodaj.rs/image/LHMS4H
https://www.dodaj.rs/image/LHMTIv
hello are these two coils compatible? red with mercury 50 sn9136284 and blue with mercury 50 sn 9265277?
I plan to replace the red coils with blue ones so that there is no problem. You can also see in the pictures that one red...
Regards to all! sorry for my english i have a mercury 50 2t 4 cil 1977, serial number 9136284 and i should replace the spark plug cables. now my question is these cables have internal resistance, given that they are with a stainless steel core? when I measure them with a multimeter the...
