Usually when they tell you to use a test light it's because they want a lower resistance device in the circuit than a DMM. Sometimes to trigger another component.
I don't know what's supposed to be on there but I've seen a system in a road vehicle that would be fairly easy to make. It was just a bent rod that hinged down across the center of the holes.
I've been boating the Trent Severn waterway for almost fifty years but we moved last fall to get closer to the grand kids. We have a slip in Port Rowan harbour for our 26 foot this season.
Boating one of the great lakes is something total new for me and I'm a little apprehensive. I'm wondering...
I think this one looks a little closer. I'm strictly going from the book but it looks like the separator plate #63 is what keeps the pin in the bottom of the shift lever to hold the cable. (if that's the one your having trouble with) This information may help also...
You need one of these if you can find one. You may need to find a repair shop that's been around since the sixties.
They were originally designed to pull the rear hub off of the old dodges with a tapered axle shaft. However they are extremely universes, very strong and if you didn't have a good...
I was going through last summers holiday pictures and came across this one. You know that they've got you packed in tight when the boater in front of you is using your bow rail as an arm rest.
Well I made it out to Port Severn by water. I took the grandsons and left the wife at home. It's not as bad as it sounds. She's saving her holidays for a trip to the east coast.
The Simcoe crossing was OK going down and excellent coming back.
It was interesting to see the old rail carriage still...
I don't know much about the Force trim system, but if you have a two wire trim motor and five wire relays, it's most likely the relay that's not clicking when you try the down. The inactive relay has to supply ground to the one motor wire. Both relays ground the motor wires when every thing's...
With an electric choke and a Mando alternator it shows a purple and yellow wire going to the choke that starts from a terminal on the alternator to the left of the brush box were a tie strap attaches. GN wire in the picture.
If yours looks like this go to http://www.iboats.com/Power-Tilt-And-Trim-Motor-18-6764-Sierra/dm/cart_id.833515915--session_id.148067998--view_id.986688
