boat foam?

M

MikeSchinlaub

Petty Officer 1st Class
Joined
Jan 14, 2025
Messages
351
brodyg201 said:
now i have a question i was going to replace the foam when i do the floor and the floor is only soft in one area in the back and i was just going to only replace like a 8 long peice of the floor up to area by the wheel and leave the front but replace the foam in the front to from trying to squeeze underneath the front . i guess my question is should i just replace all of the floor or do it where i dont have to remove the bow seats and the wheel etc ?
Click to expand...
What? This is too hard to follow without punctuation.
 
B

brodyg201

Cadet
Joined
Sep 26, 2024
Messages
26
Also i have a question for y’all my motor now doesn’t have trim. and i was thinking maybe along the road adding a aftermart trim plate. do any of you have any experience with those . and if so do you recommend them ?
 
A

airshot

Vice Admiral
Joined
Jul 22, 2008
Messages
5,676
Power trim and tilt is great when trying to get max performance from your boat and motor, but the after market stuff ain't cheap ! So...how bad do you want to get the absolute most out of your outfit ? How much HP are you dealing with? For the cost, you might consider trading motors for one that has T&T already on it.
 
redneck joe

redneck joe

Supreme Mariner
Joined
Mar 18, 2009
Messages
12,358
brodyg201 said:
Also i have a question for y’all my motor now doesn’t have trim. and i was thinking maybe along the road adding a aftermart trim plate. do any of you have any experience with those . and if so do you recommend them ?
Click to expand...
I'm in the same 'boat' on a motor i bought for 400 bucks. Aftermarket stops at about 40hp unless go crazy custom which costs. I an buy a used off ebay for about 1200 but do is that juice worth the squeeze? Its got a whale tail on it so id prob just live with it for in between hole shot and top end. I am not after performance just a bit more hp.
 
Last edited:
You must log in or register to reply here.
Top