Search results

  1. D

    lync and sync

    sorry to ask this procedure, but i am puzzled at the point of the first timing primary setting, when you advance the throttle is this when you should see 3-4 degrees, i lubed my trigger and tightened the mount it was loose and hanging up, so now i am trying to set the first timing mark and am a...
  2. D

    electric fuel pump tower of power 115hp

    1984, i like so many others lately have a no wot issue, it idles, when you dump the throttle you think hold on,,, then it bogs, pull it back to 1/3 throttle it idles ,, try it again,, dies,,, got a rebuild kit for the pump,,, something seemed different in the kit from what i had,, napa auto...
  3. D

    spark plug search

    can you suggest the best plug to run, ngk does not make a plug or at least call for a plug to use in my engine,, it call for a ngk br8hs-10 , so now i am educated on the -10 meaning it is pr gapped, but how about a plug that is like the evinrude style that has the no post coming off the side in...
  4. D

    200 etlh 1987 idle issue

    2 different manuals. 2 different adjustments, i know these carb adjustments are starting points, meaning set them at the suggested turns out and then adjust from there, the port and starboard side are also different,, my promlem is a lean sneeze,,, it will idle in gear for longer then the...
  5. D

    mercarb advise

    no gasket under my float bowl jets, do you need them, brass to alluminum? no spring and ball and clip under the accelarator pump, tore down 2 other carbs, they did not have the spring in them either, i read some intresting notes in my manual about left hand turns when you have something wrong...
  6. D

    throttle srew a mystery

    can anyone help get me a part number for the throttle set screw,, there are 3 of these on my 200hp, 1987,, 5mm left hand thread,, these are used to set the throttle before you set the idle,,, my dealer ordered me in 2 different part numbers, they were both worng,,, its sotck, they just do not...
  7. D

    yamaha 87 200 idle

    when i rev my engine its staying high for a few seconds, rpms do not go down fast like other engines,,, poor idle,, cough ,, do you have to use the thermostats,, i removed them to correct a cooling problem,, solved that now do they need to go back in,,,, im in cold climate ,,,, sorry 3...
Top