Search results

  1. I

    Anyone Have a SCHEMATIC for TILT PUMP.....

    Anyone have a schematic or know where I can view one for a mercury old style trim/tilt pump? The 3 wire motor unit with 4 pump ports. Thanks.
  2. I

    Another Trim/Tilt Problem....Merc 1150.....

    I'll cut to the chase on this one. My trim unit on my '72 1150 is only using<br />3 hydraulic hoses instead of 4. This is the way it was when I got it.<br />2 hoses for the UP cylinder, and 1 hose for the DOWN.<br /><br />Under the pump where the hose fittings go I had a leak on the single...
  3. I

    Ahhhhhhhhhhhhhh!!!.......

    I thought I was FINALLY about to be able to take my boat on the water after all the work I have been doing to her.<br />I had this feeling that I should check underneath her one more time. <br />I found right in the center underneath that there was was some chips in the fiberglass. I started to...
  4. I

    Trailer Light Problems...............Please Read....

    I just started having problems with my trailer lights.<br />I installed a new light kit on the boat trailer about a year ago. <br />Now when I hook the trailer to my truck and hook up the pig tails, I don't have the right rear brake light on the trailer, and the brake lights on my truck start...
  5. I

    Need SWITCH BOX/POWER PACK PART NO.

    I need to find the PART NUMBERS of the SWITCH BOX/POWER PACK and the INTERNAL MOTOR WIRING HARNESS for a 1978 MARINER 80HP INLINE 4 CYLINDER. <br /><br />Serial number is 4842739. Thanks.
  6. I

    Mariner 80HP 4 Cyl. Need Year Please...Serial#

    I need to find the year on my 80HP Inline 4 cylinder MARINER, SERIAL NUMBER 4842739. Thanks.
  7. I

    What Year of Motor--75hp--Serial No........

    C135367<br /><br />This is a Mercury 75 horse 4 cylinder that I need to know the year of. Thanks.
  8. I

    APELCO 260 FISHFINDER--Need transducer & Power Cord

    Is there anyone that knows where I can find a transom mount transducer and the 12V Power Cord for an APELCO/RAYTHEON/RAYMARINE FishFinder?<br /><br />I have been searching the net, but haven't found any yet.
  9. I

    70's Inline 115 Trim/Tilt Mounting Bracket

    I know this is not a repair question, but I have been pulling my hair out trying to find a mounting bracket for my tilt/trim assembly.<br /><br />There are some on ebay but they are selling with the whole assembly, which I don't need.<br /><br />My motor is a 1972 Inline 6 1150.<br /><br />Does...
  10. I

    1989 Johnson 88-Worth Rebuild?

    Would a 1989 Johnson 88 that has low compression on 2 cylinders and probably needs a rebuild be worth buying for $300? It is a complete motor with lower unit.<br />I have never rebuilt a motor but an interested in doing so. What would be the average cost if I did it myself?
  11. I

    HELP! -----TILT MOTOR -----MERC 1150

    I need some help guys. I'm pretty aggravated. I just received my used tilt motor. I tested it on the batt and it worked. I hooked the pump housing back up, hoses, solenoid, wired it like service manual says, and filled it w/oil.<br /><br />It won't do anything but click the solenoid :o I...
  12. I

    Just Thought I Would Share Some Before & After Pics

    I think its lookin a lot better. I mainly have just worked on the trailer. Sanded it, primed and painted it. New bearings, races, seals, grease, etc. New light kit, I'm also going to put some black split tubing to protect and hide the wires running down the trailer, and add a winch. I also...
  13. I

    Before & After Pics-Just thought I would share Them

    I think its lookin a lot better. I mainly have just worked on the trailer. Sanded it, primed and painted it. New bearings, races, seals, grease, etc. New light kit, I'm also going to put some black split tubing to protect and hide the wires running down the trailer, and add a winch. I also...
  14. I

    Experienced Old Merc Mechanics Advice Needed

    I just talked to the one guy that had my '72 merc 1150 that said he had a<br />lot of work done to the motor.<br />Well again he told me to use it as an anchor, and that the motor is jinxed.<br />He said he bought it from a mechanic, took it to 3 more mechanics, and could<br />never get it to...
  15. I

    Almost Ready To Water Test - Advice Appreciated

    Hello Fellow Merc Inliners(& V Owners),<br /><br />I recently acquired a 1972 Merc 1150 Inline 6 on a '72 16 foot Tidecraft bass<br />boat(as some of you already know). I have been on the forums posting, reading, researching. I<br />bought a service manual from mercury and have actually been...
  16. I

    Motorguide 756-Need Wiring Diagram

    I just bought a used 1997 Motorguide 756 57# 12/24 foot controlled trolling motor today. It doesn't have a plug on the end, it has 3 wires, red, white, and black. I tested it to make sure the motor worked, and black to -neg, and white to +pos and pushed the button on the foot control and the...
  17. I

    Tilt Motor Fried-Can It Be Fixed? Merc 1150

    I have been testing my tilt motor and now know it is shot .Mine is on a 1972 merc 1150 inline 6. The motor and pump is one unit. I pulled the top plate off the motor and one brush was not on the spring, and the other side has no brush. Very corroded looking. I can post pics if needed.<br />Can...
  18. I

    Need to know weight of my boat-Look at pic

    I'm wanting to know the approximate weight of my boat. It's a '72 16 foot fiberglass Tidecraft. Thanks.<br /><br />Billy
  19. I

    Will This Prop Fit???-Please Reply

    I hate to keep asking you guys about these props, but I don't want to buy the wrong one. Will a prop from a 1987 80 horse Mercury fit my 1972 Merc 115 Inline 6? It is a 17 pitch, 3 blade SS. The prop has a "through the hub exhaust". I kind of need to know quick. Thanks again.<br /><br />Oh yeah...
  20. I

    FLO-TORQ II TYPE HUB Prop Question

    Can someone tell me if a FLO-TORQ II TYPE HUB Prop would fit my '72 Merc 115 Inline 6. It's a 3 blade, includes Mercury Flo-Torq II hub assembly kit. Part #835257A1 Size: 13 1/4 x 17. <br /><br />Also, how good would a 2 blade 19 pitch prop work with the same motor? The boat is a 16 foot...
Top