Search results

  1. C

    crack on the block

    Ok i think i found my fast idle problem. while watching engine idle it started to rise in rpm so i choked out the engine i seen a little bubble come from a hair line crack on the upper part rear of the block. From my inspection it looks like that section is possible the intake part of the power...
  2. C

    run away 60 h.p. johnson

    Hello everyone,<br />well got my engine to start after messing with the main wiring harness. My new problem is that while the engine was idling the rpm started rising and seemed to be way to high for safety reasons so i turned off the key switch and it kept running. I then grabbed the fuel rail...
  3. C

    1984 johnson 60 h.p. no spark

    Whats up everyone,<br />My above outboard ran fine 2 weeks ago then tonight went out to start it to take it out for its first voyage with me as owner. I had no spark on either cylinder. The red plug coming from the control box, I took the plug apart and one of the prongs was corroded and was...
  4. C

    lower unit replacement

    When replacing the lower unit do in need to seal the lower unit housing with 5200 or just bolt it in place?
  5. C

    water pump pipe to the power head

    I have a 1984 60 h.p. johnson that i just replaced the lower unit. My question is the pipe that comes out of the water pump and that goes into the bottom of the power head has a small hole in it but it looks like a factory hole and not corrosion. Is that hole suppose to be there? Also when i ran...
  6. C

    1984 60 h.p. johnson 2cyl

    I was wondering what is the proper spark plug for my 1984 60 h.p. johnson 2 cylinder. Any help will be greatly appreciated.
  7. C

    60 h.p. shift rod height 1984

    Trying to find the shift rod height for a johnson 60 h.p. 1984 model. I know you have to measure from the neutral positon to the center of the hole. If anyone can help it will be greatly appreciated.
Top