Search results

  1. chicubs08

    1993 Tigershark Specs needed.

    I just bought a 1993 articcat tigershark. I cant seem to find any specs on it. Like what type of battery i need,spark plugs,fuel filters,oil, ect. Also whats the top speed. Does anybody have this info? When i bought it it didnt come with a battery or any manuals.
  2. chicubs08

    My Mercruiser 140 wont go into gear. please help.

    I have a 1984 Rinker with a Mercruiser 140. The boat wont go shift into gear. when i put the boat in gear, it will just rev up but the prop will not spin.The prop does lock into forward when the boat is in forward gear and locks into reverse when its in reverse gear and spins freely when its in...
  3. chicubs08

    Power Steering reservoir

    I have a 1984 Rinker 18' open bow with a Mercruiser 140 , 3.0 L, 4 Cylinder Engine. Does my boat have a Power steering reservoir? if so where is it located. i can't find it. thanks
  4. chicubs08

    Changing my Gear Lube

    Can i leave my alpha 1 out drive without gear lube ? I emptied the outdrive gear lube but the store is closed to go buy gear lube. I will do it tomorrow morning. Can i leave it without gear lube? Thanks
  5. chicubs08

    Mercruise won't go into forward gear or reverse.

    I have a 1984 Rinker witn a Mercruiser 140 and i took it to the river today. I was giving it throttle all of a sudden the prop stopped. I might have hit something, i don't know. I put it back to neutral and put it in forward gear and it wont go into gear. forward gear or reverse. Any ideas? Thanks
  6. chicubs08

    Chicago River Bars and Dining.

    Are there any bars on the Chicago River or places to dine?
  7. chicubs08

    Mercruiser 140 BackFiring When boat is on Water

    Why does my Boat Backfire when its on the water. and on land with the ear muffs it doesn't? I have a mercruiser 140, 3.0 L, 4 Cylinder. I have giving it a complete tune up. including a rebuild carb. Any help will be greatly appreciated.
  8. chicubs08

    Chicago River Speed Limit?

    Whats the speed limit on the Chicago river for boats? or is it a no wake zone for the whole river?
  9. chicubs08

    Merc Carb Adjustment ?

    I have a Mercruiser 140 3.0L, 4 Cylinder. With a Merc carb 2 barrel. How do i adjust the carb? I took it out this pastweek to the river. The engine was kind of hard to start. i had to hold the choke flap wide open in order for it to start. When i accelerated the engine would back fire. I have to...
  10. chicubs08

    Did i mess up my Engine? Ford omc

    My buddy and i took out his Bayliner yesterday to test it out on the water. He forgot to winterized it this pasted winter. We were cruising for a about 10 minutes when the engine lost power. We took the engine cover out and found out there was Engine oil at the bottom of the engine. Somehow it...
  11. chicubs08

    No Spark on Mercruiser 140

    I only get spark on 1 cylinder on my mercruiser 140. Could it be the spark plug wires? They have been on the boat for at least 3 years. I have replaced everything, Ignition coil, spark plugs, rotor,points, cap,condenser.
  12. chicubs08

    Mercruiser 140 Ignition Coil Question

    I replaced my Ignition Coil on my Mercruise 140. The old coil didn't need a resistor. The new Coil from Sierra Marine does. What is a resistor? How can i install one? Is that why my engine does not turn on? Thanks
  13. chicubs08

    Need Help Wiring My 92' Jeep Cherokee

    I bought a 4 wire universal Vehicle Kit from auto zone. I hooked it up to my jeep but i don't know where the tail light cable goes? My tail light has 2 cables 1 for the brake when the lights are on and the other one for when you hit the brakes. Where does the cable go? If i connect the to either...
  14. chicubs08

    Mercruiser 140 Fuel Problem !!

    I just replaced the fuel pump on my boat. But the boat still does not start. Fuel is getting to the carb, i could see the jets throwing fuel into the carb. I also replaced the ignition coil, spark plugs,Rotor, Points, Cap. But i didn't set the dwell since i don't know how to do it. Could this be...
  15. chicubs08

    How to treat plywood?

    I just replaced a piece of plywood by the ski locker. I used regular plywood, not marine grade. How do i treat it and make it water proof? Thanks
  16. chicubs08

    Mercruiser Impeller Question?

    I just bought a 1984 Rinker Bowrider. And it came with a impeller kit. Should i replace the impeller? The boat was sitting for about 3 years. And How hard is it to replace it?
  17. chicubs08

    How to Install Fuel/Water Separator?

    i have a 1984 Rinker bowrider with a Mercruiser 140,3.0 L, 4 cylinder and during summerizing I noticed that there was no fuel water seperator system.There was a inline fuel filter in the gas line, between the gas tank and the fuel pump. I am about to install a New Fuel Pump and i would to to...
  18. chicubs08

    No Spark on Mercruiser Please Help !!!!!

    I bought a 1984 Rinker that has been sitting for the past 2 years. I tried starting it but it gets no spark from the spark wires or the coil. The engine is a 4 cylinder, 3.0 L, Mercruiser 140. What could it be? The ignition coil looks new. and i replaced the spark plugs. Thanks
  19. chicubs08

    My First Boat(1984 Rinker 19') Need Help Getting it started.

    I just bought my first boat. It's a 1984 Rinker open bow, 19'. It has a Mercruiser 140, 181 cid ,3.0L,4 Cylinder. The guy i bought it from had it running 2 years ago. He told me i needed to rebuild the carb because the float was sticking. The carb is off the boat now. I just bought the rebuild...
  20. chicubs08

    Rochester Electric Choke

    I have a 1987 Bayliner Capri 1750. I took it out yesterday on the water but when i gave it gas the boat wouldn't go that fast. so i started messing with the carb and found out my electric choke is not working. The carb on the boat is a Rochester 2GE part #17086107. Where could i find an Electric...
Top