Search results

  1. S

    AQ131a/275 lift out device

    Working on the lift out device because it doesn't work. I have removed the motor and tested it on the battery, it works. Hook it to the wiring for the relay box using the switch all I hear is clicking and the motor doesn't turn. Any next steps I should take?
  2. S

    AQ131a/275 shift and throttle cable

    I am experiencing a drop in idle when going into gear. After running the boat hard going back into neutral the rpms will go from originally 900rmp to 1200 if I slam it into gear rpms drop back to 900rmp. I do not like slamming it into gear (I did it for science). Anyone have any idea what I...
  3. S

    Aq131a overheating

    Ok so I have replaced the elbow and gasket rubber seal for the elbow and used gasket maker to seal it up and I am still overheating. Did I install the seal wrong I made sure the sealing ring was face down and used the silicone on the sealing ring. Worked great my first trip out and now back to...
  4. S

    86 bayliner capri stalls when shifted into gear

    I got the boat to idle and rev in neutral but when I **** into gear it stalls out. The motor is a aq131a with a 44pa1 carb.
  5. S

    1986 bayliner capri aq131a raw water issue, vent tube issue, and outdirve issue

    The raw water pump is leaking water from the back of the pump as well as a few of the copper lines, I have replace all seals and it still leaks like crazy, if anyone has any tricks for this please let me know, as for the vent tube it doesn't seem like there is a whole lot of pressure coming out...
  6. S

    1986 bayliner capri aq131a 275 outdive

    so I have 2 issues, I rebuilt the solex 44pa1 carb and now the accelerator pump isn't working, ontop of that the boat is taking on a bunch of water, I just did a service on the out dive and the oil looked good, I was thinking about replacing the seals, is there anyone that can give me a list of...
Top