Search results

  1. N

    Optimax coil questions

    Serial number 1B533319
  2. N

    Optimax coil questions

    I have an 07 150hp optimax (2.5L) Last fall, I noticed a drop in rpms and difficulty turning over motor. Tested coils and then found #4 was dead. Changed it out, but in the process, noticed that the coil mounting bolts were stripped. I cleaned threads and snuggled them hand tight for the new...
  3. N

    evinrude 48 SPL bogging down?

    2 stroke Evinrude 48 SPL 92' model Engine starts and runs great at first.... Motor will not miss a beat an any speed and seems perfectly fine... However, after about 10 minutes or so (10 minutes of running wide open and about 20 minutes of running half throttle), the engine will begin to miss...
  4. N

    Evinrude 48 Missing/Sputtering amongst other problems....

    48 Evinrude SPL Idles roughly... shakes alot. Without even touching my warm up lever the engine revs up a bit on its own(not alot but def. noticeable) Just had carbs clean. Engine will spit(a light backfire) before it is warmed up properly. Engine cleary has a "sputter" or "miss". Motor starts...
  5. N

    rotary steering helm question (installation of cable)

    I just ordered a teleflex steering cable for my boat. When disconnecting the old cable from the helm, i found a POSSIBLE problem. after loosening the bolt (the one that connects the cable sheath to the helm) and turning my steering wheel so the cable would slide out all they way, i was able to...
  6. N

    Steering cable help

    I am new to this sight and also boating so please excuse my "rookie like" terminology. 79' yazoo 16 ft. with a 92 evinrude 48 hp SPL Just before heading out to the lake, i turned my steering wheel in order to get my prop properly aligned (centered). As i did so, i heard a horrible "cracking"...
Top