Search results

  1. A

    Shipping a powerhead

    I sold a powerhead on ebay and was wondering if anyone has any suggestions, maybe from experience on what is the CHEAPEST way to ship it to the bidder. I live in florida and the buyer lives in Texas. Also I built a nice and sturdy crate for it out of 2x4's. Any help is appreciated.
  2. A

    1982 90hp Johnson V4, Melted piston

    Ok, it is my turn to spill the info on my burnt up piston on my motor. Here is the history. Bought a boat and motor with seized motor. Broke it loose. Rebuilt carbs, thermostats, water pump, fuel lines & vents & pump. Ran great on the hose, put in water and took some work to get it to idle right...
  3. A

    1982 90hp Johnson idle question

    I ran my motor that I fixed from sitting for years and it idles good on the muffs but when i put it in at the boat ramp it didn't want to idle very well in the water. It would idle low and stall when I put it in gear while in the water. Any suggestions.
  4. A

    1968 3hp evinrude wont accelerate

    We have rebuilt the carb and put a new fuel pump on this motor and will start on first pull and run as long as needed, but it won't accelerate. Full throttle is the same as idle. Checked the points and set them to a business card gap. Spark on both cylinders but top cylinder looks weak and the...
  5. A

    1968 3hp Evinrude lightwin

    I got a new fuel pump and it immediately fixed my fuel flow problem. New issues however have arrived. At WOT it will only idle. It will stay running with no problem but it will not accelerate.. You can hear it pulsing a bit, like it wants to go faster but won't. We noticed that the bottom plug...
  6. A

    1968 3hp Evinrude Lightwin tell tail

    Just out of curiosity, I was given this 3hp rude and I have done the water pump, carb, fuel lines,etc. I can see where the exhaust comes out on the back but I cannot find where the water comes out from the water pump. It has to go somewhere, and more importantly I want to make sure it is pumping...
  7. A

    1982 90hp Johnson wet plugs,exhaust etc

    I brought back to life this motor after being frozen for 2 years. The compression is good all the way around with no scoring. I have been running it on the muffs only because I am putting in a new floor. I run it for about 10-15 minutes on the muffs once a week. I have been running the oil heavy...
  8. A

    1968 3hp Evinrude Lightwin carburator Problem

    I rebuilt the carb on my 3hp lightwin and now it is running through a bowl of gas and then revving up really high and shutting off. What does this sound like, i have the top and bottom adjustments set as the local evinrude shop told me. Also the bulb goes soft after it quits as well, you have to...
  9. A

    1991 Yamaha 85hp Lower Unit

    I am working on my cousins 91' 85hp and on the lower unit there are three flat headed screws, one says "wash" one says "Fill" and the other is just the drian plug for the gear lube. I am mostly unsure of what the "wash" hole is for, any help is apprecaited. I loosened the screw and there was a...
  10. A

    1991 Yamaha 85hp tilt and trim

    Got a 91' 85hp yami and the motor sat tilted down for about 3 months and we tried to tilt it back up and the system was making noise like it was trying but it wouldn't tilt up. We lifted it up manually and tried tilting down and that worked. So Up is not working but down is, system is making...
  11. A

    1982 johnson 90hp

    i took apart my control box for my johnson to fix a broken screw to hold the fast idle lever on, upon reassembly something isn't right. i had a manual but lost it somewhere in my garage. anyone know where i can get a diagram of the parts on the control box??
  12. A

    1983 15'3" Sportcraft Ski Boat

    I am renovating a 1983 Sportcraft ski boat and was wondering if anyone knows where I can get pictures of the original interior design. Thanks for any help. It has a walk through the windows bow style.
  13. A

    1983 15'3" Sportcraft Ski Boat

    I am renovating a 1983 Sportcraft ski boat and was wondering if anyone knows where I can get pictures of the original interior design. Thanks for any help. It has a walk through the windows bow style.
  14. A

    1982 Johnson 90hp, throttle and shift cables

    Anybody know how to lubricate the throttle and shift cables once off the motor and control box.<br />Thanks
  15. A

    Johnson model and year???

    I need some help finding out some info on an outboard someone is looking to swap me. Here is the numbers off of the vin plate..<br /><br />Model: CD-18<br />Serial: 2111595<br /><br />Thanks in advance...
  16. A

    1968 3hp Evinrude lightwin

    Thanks alot guys, your help is appreciated.. Do you know whether or not you have to disconnect the powerhead to get the driveshaft out for access to the water pump? And I can only find one grease fitting for lubrication, is this all there is. Thanks..
  17. A

    evinrude lightwin model year??

    I recently was given a 3hp evinrude lightwin and I was wondering what year it is, can anyone tell me what year it is? Here is the serial number.<br /><br />3806A-E02741<br /><br />Thanks...
  18. A

    compression on a 90hp johnny

    I recently brought back to life a 90hp v4 johnson outboard. it is a 1982. it has been bored out with oversized pistons. i rebuilt the water pump, thermostats, carbs, etc. it was seized when i got it and i broke it loose and cleaned it out. just got it started and ran it at idle for about a half...
  19. A

    Johnson carb re-build question

    I have a 1982 Johnson 90hp v4 outboard. I recently re-built the carbs with Sierra carb re-build kits. I only replaced what came with the kit which I believe is just the standard stuff like gaskets and stuff. My main question is, I was wondering if a basic re-build will affect your idle or...
  20. A

    where to find ignition coils

    I am re-building a 1982 Johnson v4 90hp outboard and it seems that not all of my coils are producing spark. 2 out of the 4 work. Does anyone know where I can get some coils without having to go to the jonson dealer and pay top dollar for them?? Any help is appreciated.
Top