Search results

  1. R

    TACH NOT WORKING

    PUT NEW VOLTAGE REG/REC ON 1992 200 H.P. JOHNSON NEW TACH, HAD STATOR CK OUT. CHECK GRAY WIRE FROM REG/REC TO TACH ITS NOT BROKEN. TACH STILL NOT WORKING?? ITS IN SHOP NOW. GOING COST ME. AND OU'ALL KNOW THE ANSWER. COULDS YOU GET TWO BAD REG/REC. I PUT TWO NEWS ON ?? STILL NEW TACH DID NOT...
  2. R

    PULL FLY WHEEL

    NEED TO FIND A 1-7/16 THIN WALL SOCKET TO PULL FLY WHEEL ON 1992 200 HP JOHNSON - REASON IS NUT ON FLY WHEEL IS RESAT ON FLY WHEEL CANT GET TO IT WITH REGULAR 1-7/16 SOCKET. DO I HAVE TO BUY A THICK WALL 1-7/16 AND GRIND IT DOWN. THEY WANT $50.00 TO PULL IT HERE IN MOBILE,AL AND $50.00 TO PUT IT...
  3. R

    primer blub goes flat

    have two 200 h.p. johnson 1992. have one water separater with two outlets to the engines. the farest one from water separate primer blub goes flat and is getting no gas to engine/. what causes primer blub to go flat. iam going to replace its about 5 year old.<br />do i have other problems>???
  4. R

    TACH METER NOT WORKING. RPMS METER?

    2 200 H.P. 1992 JOHNSONS. RIGHT TACH WORKS. LEFT TACH DOES NOT.TACH DOES NOT MOVE KEY ON OR OFF. PUT METER ON ONE NOT WORKING GETTING VOLTS TO. NEW KEY SWITCH PUT ON LEFT MOTOR. CHOKE WORKS MOTOR STARTS FINE RUNS FINE SO SWITCH MUST BE WIRED OK. HOW DO YOU CHECK A TACH FOR GOOD OR BAD?<br />CAN...
  5. R

    MOTOR RUNS 4200 RPMS THEN DROP OFF

    (2) 1992 JOHNSON 200 H.P. HAD WATER IN GAS. HAVE WATER SEPARATER. MOTOR RAN OK STRAIGTH BUT ON TURNING ITS RUNS BAD LOSING RPMS. ALSO THE BLUB GOES FLAT AS A PANCAKE. WHAT CAUSE BLUB TO GO FLAT? UNDER STAND WATER IN GAS? DO I HAVE A AIR LEAK? HOW TO CK FOR AIR LEAKS? OR IS IT SOMETHING ELSE. ANY...
  6. R

    WIRING

    (2) 1992 200 HP JOHNSONS- TAN OR BROWN WIRE FROM MOTOR TO KEY. ITS LOOSES ON BOTH MOTORS WHERE DOES IT GO AND WHAT IS IT FOR? ANY SUGGESTION WILL HELP. JUST GOT MOTORS.
  7. R

    WIRING

    1992 200 HP JOHNSON - WHATS THE TAN WIRE GO TO, OFF WIRES THAT GO TO KEY. THIS BROWN WIRE GOES FROM MOTOR TO KEY BUT ITS LOOSE?? JUST GOT 2-200 HP.MOTORS AND BOTH TAN WIRES WERE LOOSE. MANUAL SAYS NOTHING. ANY HELP APPRECIATED...
  8. R

    sending unit for trim tilt 1990 mercruiser - bravo 1 outdrive

    can they be fixed by cleaning parts . also which side<br />is what and what does it do . my trim gauge does not work. wires from sending unit on side of outdrive look ok. they go to the pump. how are they hooked to pump?? wires then go to gauge. is sending unit major problems. can you take them...
  9. R

    sending unit for trim tilt 1990 mercruiser - bravo 1 outdrive

    can they be fixed by cleaning parts . also which side<br />is what and what does it do . my trim gauge does not work. wires from sending unit on side of outdrive look ok. they go to the pump. how are they hooked to pump?? wires then go to gauge. is sending unit major problems. can you take them...
  10. R

    starting

    1992 200 hp johnson was running 5-1-3. tried to start 9-1-3- will not start. starter not spinning faster enuff on first 2-3 starts then starter will spin until let key go. ck battery ok. ck all connections ok. have a small leak at priner solinoid . carb over hauled 1 yr ago. i have 2 200 on a 25...
Top