Search results

  1. A

    Epoxy resin to seal new decking

    I'm going to replace a section of decking on my boat, I have the marine plywood and im going to replace the carpet with EVA waterproof foam. Before I put the new floor down I want to seal the marine ply. Whats the most effective product for cost on the market, I live in Canada so I dont have...
  2. A

    Boat floor soft only around ski locker

    yea same here the edges werent glassed and the water snuck in. I had a look under and the rot only goes about 3-4 inches from the ski locker, nothing else is rotted. Past that 5 inches, the floor is solid. And the ski locker is entirely glassed. I cant see any exposed stringers. How do i tell
  3. A

    Boat floor soft only around ski locker

    I just uncovered my boat for the first winter after I bought it, its a 1995 Sea Ray 180, im currently in the process of fixing the passenger front bow seat because the wood on the backing of the seat is rotten. Walking up and down the boat i noticed that the area withing a couple inches of the...
  4. A

    No Spark, feels like I’ve tried everything.

    just as a test you should get a long wire that can handle the amperage and connect it to the closest ground terminal to the ignition system all the way to the negative on the battery.
  5. A

    No Spark, feels like I’ve tried everything.

    corroded terminals anywhere on the ignition system like grounds or positives. I had an issue on my 1995 sea ray where the battery wasnt charging i was getting good ( a little high voltage) out of it and spent so much time on the wiring system only to find out one of the connectors was holding on...
  6. A

    No Spark, feels like I’ve tried everything.

    its strange that it was working fine last year then the first startup theres no spark. What i would think is that moisture maybe eventually rusted out a terminal so while it says you have 12v from the multimeter, the connection is no good. That or an animal got in during storage and chewed...
  7. A

    No Spark, feels like I’ve tried everything.

    with power off yes, check continuity and resistance, the ignition wires im pretty sure will have a measurable resistance im not sure what yours would be
  8. A

    No Spark, feels like I’ve tried everything.

    did you check to make sure the return sides going back to the battery were all good?
Top