Search results

  1. rolmops

    kicker location

    Unless my fishing buddy is big and fat....
  2. rolmops

    I'm sad, need new gps

    I would buy a Garmin with a proper mapping setup that can be refreshed online. Tidal currents tend to change channels and their depth. The boss will not be happy if you show up late without fish and up to your neck covered with muck
  3. rolmops

    For those of us who tow our boat, do you inspect it ?

    That could have caused some serious damage on the road. Imagine that one wheel deciding to go off by itself. Yes, I do inspect the trailer yearly for nasty stuff like that. In NY every trailer has to be inspected yearly, but I doubt that this sort of thing would have been picked up on. The...
  4. rolmops

    Strange boat disease strikes.

    Sylvan is Starcraft in all but name. It is made in the same factory by the same people. When the founder of starcraft passed , the company was divided among the kids. The daughter's share continued under the name Sylvan, There are some very minor differences.
  5. rolmops

    Strange boat disease strikes.

    We do repairs and improvements for sure, It is just that aluminum in fresh water is very sturdy, besides, what's not to love? I would also like to add the Penn Yan rigs that seem to last forever on the great lakes. I fish from a 1989 28 footer and we have had offers to buy this rig for far more...
  6. rolmops

    Strange boat disease strikes.

    That is generally true, unless it's a Starcraft
  7. rolmops

    Shot in the Dark Depth Transducer Compatibility

    like this? This is a garminplug, it is called a 5 8 because 5 of the 8 holes are active
  8. rolmops

    Shot in the Dark Depth Transducer Compatibility

    Ok here comes a fairly educated guess . The plug is a female end called a 5-8 F G This is used on the Airmar B117 and fits Garmin and Echomap units of several years. It is a 600 Before you go out and buy, go find somebody with a garmin fishfinder and double check this info. I am pretty sure...
  9. rolmops

    Shot in the Dark Depth Transducer Compatibility

    this may help : Most through hull transducers are made by Airmar . If there is a number or a name on the transducer you can use this as a guide. https://www.airmarweb.com/xref.html
  10. rolmops

    Installing a transducer in an aluminum boat

    It certainly is the easiest way to go and while trolling it works great. But when scouting for fish at higher speeds (say 10 mph) it becomes much less so because of turbulence. Shooting through a metal hull is a no no . It does not work. The only way to go through the hull is by making a hole in...
  11. rolmops

    Installing a transducer in an aluminum boat

    The ringing would only be an issue if you glue the transducer down onto the aluminum. the way to go is to drill a hole through the aluminum and install the transducer that way. Airmar sells them with this installation in mind. ( I wrote it this way because I always get mixed up between "through...
  12. rolmops

    Installing a transducer in an aluminum boat

    I have installed several airmar transducers right through the hull of Starcraft Islanders . All you really have to do is drill a hole the size of the transducer and install it. Now because it is aluminum and because you don't want corrosion you will have to get a transducer with a plastic body...
  13. rolmops

    I used up all my curse words yesterday

    I cannot help you very much with the spark plugs, but it is easy to extend your curse word vocabulary. Just walk over to your friendly Russian neighbor and ask him. There are a great and juicy number of Russian curses that are just asking to be muttered under one's breath. I could mention a few...
  14. rolmops

    1979 55HP Johnson

    You should certainly go over the carburetor and make sure that all the hoses are in good condition. You may have chanced on pre 2000 rubber which is not ethanol resistant and may have partially rotted out. and all the nuts and bolts should be properly fastened. As for the black stuff dripping...
  15. rolmops

    I used up all my curse words yesterday

    It is my firm opinion that this would never have happened if a farmer would have designed that engine.
  16. rolmops

    Birds in the boat . . .

    You may want to take in consideration that small songbird hatchlings usually leave the nest anywhere between 10 days to 2 weeks before leaving the nest. They will not come back to the nest after leaving.
  17. rolmops

    Fuel pump

    It looks like you took a perfectly fine fuel pump apart. I do believe that you problem is in your carburetor. Or with the position of the fuel enrichener on your remote. Starter fluid is very unhealthy for two stroke engines, unless you mix a bit of oil in with it
  18. rolmops

    Critters in My Boat

    put some antifreeze in a bowl. nice, sweet and deadly
  19. rolmops

    5.7 Merc Alpha One Gen one violently shakes entire boat?!

    Could it possibly be that you hit something under water with your prop while docking?
  20. rolmops

    Engine runs for 1 minute and stalls, then starts with no problem. Merc A1G1 140 HP

    It seems to me that your problem is a blockage before the filter. Maybe crud in the tank outlet /filter. Or maybe an air leak somewhere in the line that causes your fuel pump to suck air instead of fuel
Top