Search results

  1. rothfm

    Help with Part compatibility

    Hi, been crusing through the books, BRP and other online resources and am still confused if a part needed found on Ebay will work for my motor. the part in question is PN: 0322860 mount. Usually item 12 or 13 on the mid-section pages of the diagrams. This is on ebay for a decent price...
  2. rothfm

    What are these Cables?

    Hi All, 1995 Evenrude 88spl. recently acquired. double checking a few of the open cables under the cowl to be sure. If anyone is able to ID them, would be most appreciative. This one comes from the black plastic rectangular box at the upper back-near where the chain hook is: this one is...
  3. rothfm

    Is there such thing as a "kit" for lower unit reseal etc...

    Just looked up pn's for my 88spl and 115....but is there "kits" that have most of the common items to O-ring, and reseal lower units? Maybe also including impeller items too? going to open both up soon and would like to have most items oh-hand prior. Wondering if there are kits available so I...
  4. rothfm

    Looking for the Masters of Swivel Bracket knowledge! very sticky swivel on 1990 88sp

    Re: Looking for the Masters of Swivel Bracket knowledge! very sticky swivel on 1990 Ok, I'm hoping Surrender can chime in here-or anyone that has taken out the Steering/swivel shaft. Ran into some trouble. Attached is a couple pics of where I'm at. I was very happy to get the large nut on...
  5. rothfm

    Looking for the Masters of Swivel Bracket knowledge! very sticky swivel on 1990 88sp

    Re: Looking for the Masters of Swivel Bracket knowledge! very sticky swivel on 1990 Todd, Trying to post a pic...I may have found that second one. Is this the location. On Port, upper about 1/2 inch from the upper tilt ram pivot, facing foward? Mine was missing its zerc and the hole covered...
  6. rothfm

    Looking for the Masters of Swivel Bracket knowledge! very sticky swivel on 1990 88sp

    Hi All...I've read everything I can find on sticky/stuck swivel brackets...There isnt a ton, and some seem misleading. Thanks in advance for any real-life practical advice. A bit long winded here, because there seems to be folks swapping terminology around and it can be confusing. First of all...
  7. rothfm

    thoughts on maintanance on newly acquired 1990 88spl and 1984 Johnson 115.

    Hi all, Looking for some input on maintenance I recently bought a 17' CC that had a 1990 Evenrude 88SPL. It turns out it was on a CMC Braket masking a TNT and Tilt Tube issue, it also has a very very stiff Swivel Bracket. I may still look at working those issues and maybe keeping this as a...
  8. rothfm

    flow of cooling water dischard on force 150

    Hi All, My motor is running aok, but was curious if when running in a barrell if the water discharge out of the two upper holes should be "flowing" or more like spitting. Water comes out ok and is hot, but maybe it is not a solid flow is due to the fact it is in a barrell with alot of bubbles...
  9. rothfm

    New boat cover-boat very wet inside!!

    Any Cover pros out there? sorry for the book, my wife says I talk too much! I finally purchased Boat cover...My last post was for help "shopping" for one...But sad to say I need to inquire again about the new one LEAKING :( Its been on the boat one day, went on dry now its pouring today. Its a...
  10. rothfm

    Boat Cover for High Bow Rails

    Does anyone have a boat cover (non-custom) covering high bow rails. Here's the scoop. I have a 21' open V hull, dual console fishing boat (actually a fish+ski)..I've looked at many online Semi-Custom or Universal covers that sound and look ok. But I'm not certain they will go over my 12+inch...
  11. rothfm

    Relocating Battery

    Can I ask you knowledgeable people the best way to move my battery from starboard side to Port side. I have rear seats on each side of the motor. It So happens my 9.9 Kicker is on the same side as the battery. For weight balance, I'd like to have it on the other side. There is access...
  12. rothfm

    Another Oil Question...TCWII ???

    I just noticed a small sticker on my '94 150. Its in the front lower area below the cover. It says Use TCW-II oil....Is this just the spec back in that era? I only know the TCW-III designation. I read alot of the oil forums, and really didnt see this. I'm going to go with Quicksilver Premium...
  13. rothfm

    increasing tire size no reason, just piece of mind

    Another tire question..... My 21 open fish+ski is matched to its trailer, no issues towing. I need to replace its F78-14 ST tires load Cap "C". Was wondering if there is any benefit to going to a 15' tire load C or D. No particular reason, other than a maybe a beefier, more durable tire?? I'd...
  14. rothfm

    Trailer Seperating Pull pin for launching

    Hello, A couple trailer questions. I bought a 21' open fishing boat, 150 OB. The trailer has a pull pin so it will tilt. I havent used this type before. Is it worth doing. Is that for particular type ramps and inclines? Advantages, disadvantages? Also, this trailer, while in great shape is a...
  15. rothfm

    Answer Marine Boats-looking for info

    Purchased a 1989 21' Answer Marine boat (made in Haileah Florida). Looking for a manual or specs on it, or anything. Lots of searching but cant find much. I know they were sold years ago to another company but no info. Anyone heard of them, who bought them or know where I can go for info? Thanks!
  16. rothfm

    94 Force 150hp parts to have on-hand for spares

    Hi all, I'm slowly getting ready for spring. I purchased my 2nd boat. A 21' CC with a 94 150 Force. I'm an experienced boater, and mechanically inclined, and did have hesitations on the Force but going with it for now. It checked-out and tank tested good and is one owner, well maintained with...
  17. rothfm

    Value of 9.9hp force, good buy?bad buy?

    Hello, first poster. I Just bought a 1997 Force 9.9 and was curios of the value vs what I paid. Its in prestine shape used very little on a Dingy to get out to a mooring. I ran it when I bought it and again in a tank when I got home. It runs great at all speeds and idles nicely. I doesnt appear...
Top