Search results

  1. Scott Danforth

    1969 IMP "Thunder" 20 ft, Restoration

    Teal is still a common boat color
  2. Scott Danforth

    Don't know what I got

    You will need to see if the drives have the flushing fitting on the trunion cap Make sure the boat is registered and titled in your name before spending beer money on repairs
  3. Scott Danforth

    changing navington light on 19 ft./ 2007 bennington pontoon

    Looks like screws up from the bottom to remove the lense
  4. Scott Danforth

    Don't know what I got

    The paperwork and title will tell you what it is Being a 1984 means it's a project you will spend a large amount of money and time on the boat Being 3.8 liter motors means you have stringer 800 drives, which means you have a lot of spare time to look for parts that are NLA. Before firing it...
  5. Scott Danforth

    350 MPI Winterize - Block Drain?

    Weren't the temps in Texas in the 20's 10 days ago?
  6. Scott Danforth

    Winter mice are too much this cold winter in New Jersey.

    2' x 2' pieces of plywood 2' x 2' piece of hardware cloth 1" copper tube cap 12 gauge Romex Cut out a 2" diameter hole in middle of hardware cloth. Staple to the plywood Screw the copper tube cap to center Connect one leg of romex to hardware cloth, the other leg to the copper cap Fill cap...
  7. Scott Danforth

    350 MPI Winterize - Block Drain?

    Flush ports are for flushing Draining is for winterizing Adding antifreeze is for corrosion reasons on extremely long layups
  8. Scott Danforth

    350 MPI Winterize - Block Drain?

    fluid/filter change and water drained = winterized on the motor alignment inspection, u-joint inspection, bellows inspection, and gear oil inspection/service = winterized on the drive
  9. Scott Danforth

    What decking/transom composites are available?

    welcome back...... love the tag line in the signature. as far as composites, wood and fiberglass is a composite. its also still the most cost effective for a cored floor replacement however as far as composite core material to use. you can use Nida core or Coosa. however it is much higher...
  10. Scott Danforth

    350 MPI Winterize - Block Drain?

    here is the guide on winterizing. https://forums.iboats.com/threads/winterizing-inboard-and-i-o.770207/
  11. Scott Danforth

    Boat Trailer Tail Lights

    for what its worth, GM has separated all the trailer circuits onto their own fuses years ago starting in the 90's. so keep spares in the glove box.
  12. Scott Danforth

    Winterize Engine That Won't Start

    Drain the block, exhaust, hoses, etc
  13. Scott Danforth

    350 MPI Winterize - Block Drain?

    Drain the system, make sure to verify all the drains have drained and are not plugged.
  14. Scott Danforth

    Big motoe + tiny transom

    most bass boats come with a 10 year hull warranty to the original owner, some come with a lifetime hull warranty. unfortunately the warranty is non-transferable in many cases. Have a former co-worker that fishes BASS tourneys and is on the third hull under the factory supplied 250hp from...
  15. Scott Danforth

    Engine Zinc Anodes

    No, just the ones on the drive. would have to look at the parts breakdown, however I am not seeing anything at a quick glance.
  16. Scott Danforth

    Engine Zinc Anodes

    if you have them, they will be in the heat exchanger. some of the VP power steering coolers may have one
  17. Scott Danforth

    Need Help & Advice on a Purchase....

    based on the motor photos, I would go with the VP in the four winns
  18. Scott Danforth

    Need Help & Advice on a Purchase....

    isnt the crownline a bow rider and the four winns a pocket cruiser? for having kids, etc, I would go for a bow rider. for weekends with the wife, I would go with the pocket cruiser. a 5.0 anything is a bit small pushing a 24 ft boat
  19. Scott Danforth

    Carter P4389 Doesn't Work when Connected to Carburetor

    If the Carter pump moves fuel into a bucket, it will pump to the carb.
  20. Scott Danforth

    Spray of water from exhaust manifold above O2 sensor

    The downside to exhaust manifolds......If it's leaking on the outside...... It's leaking on the inside
Top