Search results

  1. S

    Bogs down at WOT

    I have read many posts and am trying it all. Rebuilt the carb on an Evinrude 1970 25hp Sportster model 25002c. I did not touch the high speed in the carb except to blow it out. New low speed needle valve and seat, and the repair kit. Starts and runs fine at idle, half, and 3/4 throttle up to WOT...
  2. S

    I can't get the points set correctly

    Install of new coils, points and condensers on a 1970 25 hp Evinrude model 25002C. I worked in a gas station in the 60's and thought I understood points. Bringing the lobe and rubbing block to the stamped word "set" area and adjust points to apx .02 is no problem but on rotation the points never...
  3. S

    Trailer u bolt help cant find mine anywhere

    I'm replacing the trailer springs and simply can not find the proper square u bolts size 3/8 x 2 x 2. The nut currently sits 1 1/4 up the threads now, so i could use ones slightly longer but would definitely run out of threads I have looked at numerous sites and even having them custom made. Any...
  4. S

    Oil mist covering engine 25 Evinrude

    I have a 1970 25hp Evinrude. It starts and runs great, however I do not know why the motor is covered with a fine mist of oil. There is no air filter or air horn. The amount of oil is quite small but I think it is an indication of gas mixture escaping or not being pulled into the carburator...
  5. S

    Need spray paint for 1970 25 Evinrude, can not find a supplier

    The model is 25002c. A 25hp 1970 Evinrude. I am looking for the correct color of dark blue and white. Just can not find a supplier for this year. Thank you.
  6. S

    Help on Lowrance structure scan

    At what speed does Structure Scan operate. I am considering a Lowrance to replace a Humminbird. For instance, Humminbird told me theirs operates ONLY between two and seven miles per hour. I would like to be able to cast and watch where the weed line is but I'm going slower than two miles per...
  7. S

    Evinrude 1960 Sportwin 10 model 10020 need a shiftrod connector

    The rod connector does not hold. I can see it slip in the side window.It occasionally will slip out of gear at high speed. All of the lower unit parts, gears, dogs, simply everything are brand new. It is as tight as a brass connector can handle so I would like to replace it but can not find the...
Top