Search results

  1. S

    Evinrude Tilt Trim motor

    https://www.marineengine.com/parts/johnson-evinrude-accessories/index.php?year=1978&model=Power+Tilt%2FTrim+1978&section=Power+Tilt+And+Trim+70+-+140+Hp+Models&yid=34192&mid=34197&sid=36352
  2. S

    Evinrude Tilt Trim motor

    Did you purge the air?
  3. S

    1998 Johnson 115 hp v4 reverse low rpm

    What boat is it on? Transom height motor model number? Instead of mph how about RPM's?
  4. S

    Info on Evinrude 115 E115TLETS

    Well being that that's what I would call a well care for motor, you have two choices. Test the motor and possibly leave some major components alone or just replace everything maintenance wise so that you have a starting point for the rest of this boat's life. So if we pretend like you have no...
  5. S

    Info on Evinrude 115 E115TLETS

    That outboard should give you years of excellent service. I hope you learn how to properly run it and maintain it. Excellent setup.
  6. S

    1993 fast strike 150 carb jets

    I've heard of that before....you should post your model number.
  7. S

    Info on Evinrude 115 E115TLETS

    100 to 140 is standard. Don't wait to start it....just stop and do the test. Should give you a basic idea right away.
  8. S

    Impeller kit number?

    Motor runs best with a tested vro.....
  9. S

    Info on Evinrude 115 E115TLETS

    No model name other than some stuff stuck on the cowl sometimes. (Saltwater, special, GT) E-tec's are a lot newer with newer technology. Owned by BRP which is a subsidiary or Bombardier. 87 octane Oil bottle should be a VRO.....variable ratio oiling. Amsoil in the 2 stroke bottle may be a...
  10. S

    Merry Christmas everyone

    Ditto buddy, ditto!
  11. S

    Merry Christmas everyone

    Yes, and happy holidays to all!
  12. S

    Max Throttle on 1995 Evinrude E150 GLEOM

    Limiting the throttle box is probably a better idea.... and limiting full throttle is rarely asked. Growing up, we always went full throttle and then backed it off some which always helped with fuel consumption.
  13. S

    2003 30hp Johnson Enforcer 2-stroke outboard missfire?

    Carbs come off fast....try just cleaning it. I use torch head tip cleaners to team out the orifices. Easy. Hot trick, instead of removing the starter and it's brackets, hit the port side carb nut with a small cold chisel or screw driver to remove it. Save's tons of time and you might not need...
  14. S

    Evinrude 88 SPL Rebuild

    Upper or lower? Or are you talking about the adapter?
  15. S

    No fuel being drawn into lower cylinder Johnson 7.5hp

    Tig welder....easy. File flat when done. Pray your bearings are ok.
  16. S

    2003 30hp Johnson Enforcer 2-stroke outboard missfire?

    Here's a 2000 I just finished servicing . Your motor should run like this.
  17. S

    2003 30hp Johnson Enforcer 2-stroke outboard missfire?

    Yes, or junk in the carb/idle circuit. Best to send us compression test numbers and then go from there.
  18. S

    90HP Evinrude E-Tec

    I have an E-tec....finest outboard ever made. Someone will stop by soon and give you all the info you need on that fine machine.
  19. S

    1977 Johnson 35 HP 35EL77H-Rectifier and starting battery recommendation?

    Agreed, even used ones on e-bay....(Oh Lord) I need to start an eBay store!
  20. S

    Max Throttle on 1995 Evinrude E150 GLEOM

    You could probably limit the butterfly valves from opening all the way.
Top