Search results

  1. S

    1974 Evinrude 115hp v4

    Worked great....and it was quality. Found a company later that was selling them online for conversions.
  2. S

    Carburetor tuning on muffs

    Oldboatfixerupper has his own thread....."1974 115" He just highjacked this one because he didn't know better. I think that tool is a carb synchronizer...probably for motorcycles.
  3. S

    1974 Evinrude 115hp v4

    Depends on how far...but yes difficult. I turned a short shaft into a long shaft by taking a 5 inch piece of soft copper, making my own flare and then shoved it home.
  4. S

    Carburetor tuning on muffs

    Hey mate, they don't like you cherry picking someone else's thread. Keep the questions to your thread. No worries.
  5. S

    Carburetor tuning on muffs

    Idle rpm's and low speed air fuel mixing are two different things.
  6. S

    1974 Evinrude 115hp v4

    Cut and solder if you can find the parts. Correct length is critical. Water should come out right away. It tells you your pump is supplying water but it doesn't say if it's circulating your motor.... so you can still overheat so be careful. Looks like the under mount green LED's might pick up...
  7. S

    Carburetor tuning on muffs

    You mean a little lean, right?
  8. S

    1977 Johnson 35hp neutral cut out switch question.

    Lol, I get that. How do you get it to hold together? I have two motors with white ones....both looked glued and maybe riveted. I might perform surgery on one just to help relieve myself of the 40 beer tokens I just spent for a new one!
  9. S

    1977 Johnson 35hp neutral cut out switch question.

    I see....now you tell me! Lol If you drill off the rivet then what?
  10. S

    Evinrude 35hp +/-1980 missfire at higher rpm (lower cylinder)?

    Ok, lots to do. Good luck!
  11. S

    1977 Johnson 35hp neutral cut out switch question.

    Okay, let me know the trick! Part number 386056
  12. S

    1977 Johnson 35hp neutral cut out switch question.

    Nothing. I know it sure looks like it. Ordered a new one.
  13. S

    1977 Johnson 35hp neutral cut out switch question.

    I did....very closely.
  14. S

    1977 Johnson 35hp neutral cut out switch question.

    Doesn't come apart as far as I can see. Glued and a center rivet or something.
  15. S

    EVINRUDE 25 hp lower unit

    I would think with all the blown power heads there should be quite a few out there.
  16. S

    CROSSFLOW PERFORMANCE ?'s

    Why did you buy a new rectifier when your old one tested good? Also, did you test your new one? I think you might have wired it wrong.
  17. S

    1977 Johnson 35hp neutral cut out switch question.

    Yes, looks like it comes apart easy enough. I'll try that. Thank you.
  18. S

    Kill Switch help

    What do you mean by one side?
  19. S

    1977 Johnson 35hp neutral cut out switch question.

    Working on a 77 Johnson 35. 35el77c To make a long story short, starter would not crank over. Finally got it to crank by grounding the soloniod. Neutral switch on the other side doesn't pass ground through it. There is only 1 wire to it....the one that goes to the soloniod. Is there supposed to...
  20. S

    1973 25 Hp. Johnson Running Rough

    Sure seems like it has to be.
Top