Search results

  1. F

    1974 reinell cuddy restore

    Under helm
  2. F

    1974 reinell cuddy restore

    Here is the frame for my cuddy. Wog's Ole timers formula
  3. F

    1974 reinell cuddy restore

    @kcassells this one's to match yours
  4. F

    engine cover gas shock mount

    Stabilus. They have good customer service and can do custom items. Not sure about 1 or 2 each but I just had them make me some. Had to order 50 for them to do a special run
  5. F

    Rehab SportCraft 222 1983 deep V hull cuddy walkaround

    That's modern chinezium
  6. F

    Canvas snap for windshield

    I would take a feeler Guage, lube er up and push into glazing and see how deep it goes. That might give you an idea where you could drill
  7. F

    Quicksilver grease - trailer and u-joints

    Could this be "open gear grease"? Sounds like something we use
  8. F

    tilt wires getting hot during lift?

    Your tilt motor has 3 electrical points. 12v+ blue = Up (sky) 12v+ green = down (grass) 12v Negative - gets this from mounting points. Why yours has a separate ground wire for the chassis might have to do with the gasket between tilt motor and Intermediate housing. I don't have that issue with...
  9. F

    tilt wires getting hot during lift?

    Get the same size or slightly bigger (and color) wire. Replace from the eyelets to the tilt motor connector. The butt connector with integrated heatshrink work well. Every splice point is also a possible failure point. Connectors should be tight. Crimps should not pull apart with a firm tug. If...
  10. F

    tilt wires getting hot during lift?

    If that is a stringer drive the green is positive power down. The blue is positive power up. Tilt motor don't have a ground. It uses the case bolts to intermediate housing for ground. Those connections are crap also and need to be changed
  11. F

    New Boat For Christmas

    Steam box the wood
  12. F

    Hooked up my battery with the wrong polarity

    You laugh at that picture but I did parttime sidework for dominos and the guy that did those commercials actually worked at my store for awhile...
  13. F

    Hooked up my battery with the wrong polarity

    1. Check for spark 2. Check for working injectors. They sell a little indicator light that plugs into injector wire called a noid. If these don't work I would guess ecu. Also a quick check of your crank/cam triggers also.
  14. F

    Start batteries repositioning

    Your diesel probably has a high torque or gear reduction starter.
  15. F

    1990 4.3 block and 1995 heads, which rocker tightening specs to follow?

    Those don't look like crush nuts. They need to be "all metal" lock nuts. If they turn easy at all with a wrench or even with fingers play it safe and get new. A couple of bucks is good insurance
  16. F

    1990 4.3 block and 1995 heads, which rocker tightening specs to follow?

    Hope you didn't roach your cam or lifter with a adjustment that was too tight
  17. F

    How to bleed trailer brakes

    I put the ball from the receiver into the actuator. Put a come-a-long on the shank, put tension on it then bled, repeat til done
  18. F

    Im fed up with this Boating life.

    I got water in my motor once from not draining manifolds after done running it on the hose. Now I always pull those plugs on the exhaust just to be safe
  19. F

    What am I looking at?

    Also don't exceed the ampcity of the wire size
  20. F

    Which bearing kits do you guys prefer?

    At my work we use motion industries..... they do just about all industrial stuff from beaings to hydraulics, servos rams etc..... Plus I get a discount 🤪
Top