Search results

  1. S

    Lenco trim tabs not lighting up/moving

    I checked voltage at the terminals that go to the switch. Sounds like I need to take that back cover off and test further. There is red, while, black, orange as well as a grey bundle of wires. I did have someone test with me to see if the lights were just off and no movement happened.
  2. S

    Lenco trim tabs not lighting up/moving

    I checked voltage at the terminals that go to the switch. Sounds like I need to take that back cover off and test further
  3. S

    Lenco trim tabs not lighting up/moving

    I have a 21ft CC with Lenco trim tabs that stopped working about 2 weeks ago. The lights on the switch do not light up anymore. Reading online said to check the fuse, it is okay and checked all connectors I could find. All seemed okay. Is it likely the control switch that is not working? Part...
  4. S

    Can't hear VHF with the engine on

    The radio full up is less volume than I'd get out of my cell phone playing music. I have actually used speaker phone to call people while on plane and heard them better than I can my VHF. I wonder if it is because it is so low or if the speaker is just horrible.
  5. S

    Slip/moored boat what do you do with your trailer?

    Older people who don't drive and have a house make for great winter/trailer storage. I have family 5 minutes away in that type of situation and it works perfectly.
  6. S

    Slip/moored boat what do you do with your trailer?

    Why would you be removing the outdrive frequently? As for needing it often, I have my boat (21ft center console) in a slip and I use my trailer 2x a year. Buddy with an I/O cuddy does the exact same.
  7. S

    Can't hear VHF with the engine on

    What would the draw to a headset be over a speaker?
  8. S

    Can't hear VHF with the engine on

    Hmm any suggestions on where you'd mount one on a 21ft center console that has a hard top? I found an ICOM one with a bracket that seems like it could work if I can find a spot
  9. S

    Can't hear VHF with the engine on

    I have a 21ft center console boat with a Mercury 225 outboard. I have a Simrad VHF installed below the steering wheel. Anytime the engine is on it is hard to hear any calls on the VHF and when on plane I can't hear a damm thing. Volume is up at the max and a NMEA 2000 system I am installing...
  10. S

    Storing splash wings on boat?

    What might work other than a beach towel that would be somewhat easy to source? I'm in souther Ontario (Canada) so this time of year it is still pretty chilly. Water was ~55F last night in the bays.
  11. S

    Storing splash wings on boat?

    I saw some people online say that they used beach towels and lawn chair bags? If I did one per part maybe that would be fine? UV and heat is my concern ideally I'd put it in the console out of the UV/heat instead of leaving them up. Having to bring them with me to the marina all the time and...
  12. S

    Storing splash wings on boat?

    I have a 21ft center console boat that I had splash wings made for in the fall. They are great however I have noticed half the time I want them I don't have them since they stay at home laying flat on the guest bed. How can I store these on the boat in the head compartment? There is 2 wings...
  13. S

    Hole from foam filling -cap popped

    I got it mostly fixed a couple of days ago. Some gelcoat ended up a little soft and a crack in it so I'll likely do another coat over it but the hole is patched up enough until I either have a professional look at it in the fall or it stays that way forever.
  14. S

    Hole from foam filling -cap popped

    Foam is dry, I do an inspection of the bilge before going out each time so it had less than a day to sit before I put some tape over it until I found find a solution. I don't feel any moisture. Seems like should be an easy enough fix. Here's hoping goes well 🤞
  15. S

    Hole from foam filling -cap popped

    I have this hole in my bilge and have been fighting to even get a quote on fixing it. Wondering what it would take to do it myself. Its about 1/2 inch wide. Some sources online say 5200 will be good enough others say it needs fiberglass. The disk is what I presume to be a cap or something over...
  16. S

    Replacing my power block

    Thanks I checked the wiring diagrams and I am pretty sure it is either a 6 or 8 gauge wire and a 96 inch run. Worse case says I should be able to handle ~50 amps. The fuse block is rated at 100 (both old and new). The fuses I have in it now add up to 27 amps - ignoring actual load - so seems...
  17. S

    Replacing my power block

    I have a Blue Sea Systems ST ATO Fuse block that has 6 spots for fuses/connections. I have maxed it out and am looking at going to a 12 spot one. Phyicially it will fit but I am trying to determine if it will handle the load properly. My boat is a Blackfin 212CC from 2019. This is the block in...
  18. S

    Batteries for 21ft CC

    Very interesting thank you. Feel like I got a good enough battery though need to do a lot more reading on them before the next set or when I install a trolling motor next spring.
  19. S

    Batteries for 21ft CC

    I ended up with the MotoMaster Nautilus. I read on the MCA vs CCA before hand though barely understood much past the basics. In terms of a more robust dual purpose battery, what do you mean? Yeah the old ones were automotive since I guess that dealer must get a good deal or something since...
  20. S

    Batteries for 21ft CC

    Wonderful thank you!
Top