Search results

  1. matt167

    Swap drives from one boat to another. How many day project?

    Can the original Mercruiser drive from 1970 work with the Alpha gimball housing? Curious if I have a good spare or not. I have the Alpha gen 1 leg of course
  2. matt167

    I just got a 1980 Renken w/OMC stringer

    The impeller is in the drive. However there are rubber parts in the exhaust you may have toasted
  3. matt167

    Restoring a trailer vs replacing a trailer

    The tires I bought might actually go with just a strap. I did buy ether in case.
  4. matt167

    Removal of Flex Seal coating from hull?

    There are zero power reservoirs where you can only row. Ones here in NY the boats even need to be registered with the DEP watershed and left at designated spots on the shoreline…. As for why someone would bother. The fishing is usually really good
  5. matt167

    Swap drives from one boat to another. How many day project?

    Im really lucky that the previous owner did a brand new transom correctly ( encapsulated ) he lost interest with the boat when he scored a newer Islander. I noticed when trying to just put it back together that he destroyed the gimbal housing drilling the pins. So that’s the whole reason and I...
  6. matt167

    Swap drives from one boat to another. How many day project?

    I’m using an overhead hoist so that’s not an issue
  7. matt167

    I don’t think this is a Starcraft

    Ask your wife to explain an MV 51 and MV 51B and how they work.. those forms are the statements for previous owners to state they own it but don’t have the registration. I’ve done it and found it no big deal. At least the DMVs near me process them without issue. But I’m curious as it’s been a...
  8. matt167

    Swap drives from one boat to another. How many day project?

    I’m going to try tugging one boat to the shop this weekend… once I have both boats at the shop and ready. What will I need and how long will it take? I’m pulling out a 1970 Mercruiser 120 and transom assembly ( drive is off ) and installing a 1986 140 with Alpha gen 1. Donor boat is complete...
  9. matt167

    Glasspar Avalon 1966 pricing

    Water ready. Probably $6k on a lucky day. Realistically probably half that You’re going to find a decent amount of interest with fishermen wanting to chop it up into a fishing boat and pay very little for it
  10. matt167

    I don’t think this is a Starcraft

    Depends on the year. If the boat uses a transferable registration then it’s easy with a photo of the HIN or serial number and an MV 51 and 51B. Also cars before 1973 as they are all transferable registration.. anything with an actual title would be impossible almost. I had to look up the last...
  11. matt167

    Transom

    Too much. A scary amount. 100hrs of work at $150 an hr figure, plus $5k or so in materials. More if they mark them up. Stringers deck and transom 99% of the time rot together
  12. matt167

    What size trailer?

    My little boat is a 14’ StarCraft runabout. I bought one of the smaller Venture trailers that fits up to a 16’ trailer with the trailer length at 17’. It gives me about a 3’ tongue and I love launching with it.
  13. matt167

    Restoring a trailer vs replacing a trailer

    That sometimes works. It will not work if the beads are touching.When I worked at the tire shop we had every available technique. What worked best for cheap trailer tires was a ring blaster.
  14. matt167

    Data on Vintage Boat

    I meant to say 1998. Typo
  15. matt167

    Data on Vintage Boat

    It’s a 1988 Lowe 1665 per the HIN. They will have all the information most likely. According to factory specifications
  16. matt167

    Restoring a trailer vs replacing a trailer

    My wife is filing the paperwork for the trailer on Friday and im picking up tires Friday night. thinking I may tug the parts boat to where im going to do the swap on Saturday. The trailer I’m going to junk, which is under the StarCraft now has tires that look great BUT they are marked USA...
  17. matt167

    Is my hull bad? Replacing stringers and seeing lots of flex

    The fiberglass is just a shell. The structure is provided by the stringers, deck and foam. You most likely need a transom as well
  18. matt167

    Restoring a trailer vs replacing a trailer

    I was considering tubes if I needed to
  19. matt167

    Old Glasspar boat

    Value of the mechanicals + the trailer value minus the dump fee are all such boats are worth
  20. matt167

    Using old mercruiser 140 engine in boat that had 3.0L with alpha one gen 2

    You will use the flywheel from the older motor and a coupler designed to fit the old motor to the newer outdrive. With all the right parts it’ll fit and work
Top