Search results

  1. tpenfield

    How thick is a gel coat usually?

    typically 0.020" - 0.030"
  2. tpenfield

    High compression in 1 cylinder - 7.4 carb

    yup, . . . in the previous video the #8 rocker did not seem to be moving as much as the others. You will have to determine if it is the rocker arm or the valve lifter that is at fault.
  3. tpenfield

    Broken Skeg

    JB Weld (as the resin) and CSM (fiberglass chopped strand mat) covered it with plastic wrap (Saran wrap) to make it lie flat and smooth.
  4. tpenfield

    Broken Skeg

    I'm not a fan of putting more stainless steel on the outdrive. So, I fixed a broken skeg with a piece of aluminum, JB-Weld and some CSM for strength. . . . . It held up quite well.
  5. tpenfield

    Propping Twins Preference/ Theory

    If you have ever tried to get a twin engine boat on plane with one engine, you will realize that it may not be possible even with a lower pitch prop. If you did find a low enough pitch prop to do so, in normal operation, it would easily over rev the engine. So, if you prop slightly lower than...
  6. tpenfield

    FACTORY PARTS..... a bit of a rant....

    I usually try to buy OEM for the exact reasons stated. Of course I feel defeated when the OEM part says “Made in China” on the package. :rolleyes:
  7. tpenfield

    Showing the Boston Whaler 13 some TLC . . .

    All launched and working well. Now for some more work on the trailer . . . :unsure:
  8. tpenfield

    1988 Bayliner Restore or Replace

    I like the idea of using all synthetic materials (rather than wood) for a restoration. The challenge is always trying to manage the cost of materials. If you do use wood, 'Exterior' grade plywood is more than adequate. No need to use 'Marine' grade. The main difference between the two are...
  9. tpenfield

    KIA Telluride for towing?

    Has to do with the recent recall . . . https://www.silive.com/news/2023/03/hyundai-kia-recall-additional-570k-vehicles-due-to-fire-risk.html The boat is not very heavy . . . I can't imagine towing should be a problem.
  10. tpenfield

    2020 Rinker Express Cruiser 370 isenglass question

    Oops, my bad. You probably got the last one. Polaris is the parent company, so maybe they would have some info :unsure:
  11. tpenfield

    2020 Rinker Express Cruiser 370 isenglass question

    Wouldn't Rinker be able to tell you the number of the eisenglass, and perhaps even provide a new one.
  12. tpenfield

    Grady White Weather Stripping

    Taco may have some stuff . Grady White may be able to assist as well.
  13. tpenfield

    Showing the Boston Whaler 13 some TLC . . .

    OK . . . New fuel pump installed and the engine is back up and running. There was a fairly large (and rusty) lifting arm for the now defunct trim/tilt system, which I removed by way of the impact driver. It makes for an easier reach for the tilt lock latch. The LU had a fair amount of...
  14. tpenfield

    Bow light not working

    Unless we get some more info from the OP ( @rjmman ) it is all speculation. I am holding out for a SPDT switch with the wire reversed . . . :D
  15. tpenfield

    Outboard loses prime, unless I stand the tank on end

    You might be able to get a view of the fuel pick-up from the cap fitting itself. Perhaps no need to take things apart. It seems like the fuel pick-up is not laying on the bottom of the tank. Does the fuel system prime if the tank is fairly full?
  16. tpenfield

    1991 wellcraft rebuild

    As stated, some pictures will help. You probably have quite a bit of work ahead of you before fiddling with the engine/outdrive. You probably want to understand if there are any horsepower limits to the Wellcraft model that you have. While you are rebuilding the boat, you can keep an eye out...
  17. tpenfield

    Broken Skeg

    Not sure the insurance company will entertain your claim for a lower unit. :unsure: If they do, just be prepared for the following year when you get the renewal pricing o_O
  18. tpenfield

    Bow light not working

    I'm thinking it may be a SPDT switch and the wires are backwards. . . or the switch itself is upside down. Won't really know until we get a bit more info about the switch (pictures of switch . . . front & back)
  19. tpenfield

    Bow light not working

    Can we get a picture of the back of the switch? Did the switch work properly before?
  20. tpenfield

    Kodiak Anchor - Made by SouthCoast Marine . . .???

    All set . . . . . The rode does need some tension on it for it to make the transition from line to chain, but it should be fine. In doing a few test anchorings, I noticed that the bow roller had more sharp edges and was abrading the rode. So I did a bit more filing and sanding of the sharp...
Top