Search results

  1. bruceb58

    2021 NFL/NCAAF News and Nonsense

    Gruden no longer the coach! He is a complete idiot.
  2. bruceb58

    Long distance commuters

    I used to commute a couple hours each way for a commute that would only take 30 to 45 minutes with no traffic. I then got in a carpool and we left our park and ride at 5:30AM and it was around 30 minutes. During the summer, I would actually ride my bike 17 miles after I drove to the coast. I...
  3. bruceb58

    2021/22 - CFB

    The lady that jumped over the wall was his wife!
  4. bruceb58

    2021 NFL/NCAAF News and Nonsense

    When Urban Meyer brought Tim Tebow in to try him out as a receiver, that was the first sign he didn't know what he was doing.
  5. bruceb58

    Internal Coolant Flush and Winterizing VP 4.3 GXI-BF

    Sounds like he has a closed cooling system with a heat exchanger. If so, why does he need to drain his block?
  6. bruceb58

    2021 NFL/NCAAF News and Nonsense

    I was talking about the guy dropping the football...Urban Myer is a knucklehead too. Urban Meyer did not go to OSU. My wife's friend is good friend's with Urban and his wife. She works at OSU. Will see where all this goes.
  7. bruceb58

    2021 NFL/NCAAF News and Nonsense

    They don't call it the Secondary Education Conference for nothing!
  8. bruceb58

    Grounding coil for compression test

    By just leaving it open, that's a sure way to blow out the coil. When it is open, that high voltage has to go somewhere so it blows through the insulation inside the coil trying to find a ground. By grounding it, you don't have that issue.
  9. bruceb58

    What advice on renting a room out?

    I rented a room to a cousin. Besides almost flooding my house by letting a bathtub overflow, he didn't pay me rent for the last 6 months after he quit his job thinking he could get a better one.
  10. bruceb58

    Scan tool for new VP 4.3?

    I own the Diacom.
  11. bruceb58

    Volvo Penta in Bayliner 1989 runs in start position but not in run position

    You need something like a Rinda to read the codes. Forget doing the flashing light code thing. https://www.rinda.com/
  12. bruceb58

    Volvo Penta in Bayliner 1989 runs in start position but not in run position

    yes Typically, that's more of an issue with an older engine with a points distributor with a ballast resistor. Likely not an issue with your since its a newer engine but worth checking anyway.
  13. bruceb58

    2021 NFL/NCAAF News and Nonsense

    I love watching the Mannings...too bad they won't be back on again until week 7
  14. bruceb58

    new surge brakes installed

    Drum brakes have a residual valve on the master cylinder output to keep a slight positive pressure in the lines.
  15. bruceb58

    2021 - NFL Week 3

    You don't do that with the best QB playing the game right now. My wife calls that the "preventing us from winning" defense.
  16. bruceb58

    Volvo Penta in Bayliner 1989 runs in start position but not in run position

    Check your voltage at the coil in the run position. You have electric fuel pumps on an 89? That is kinda odd since I don't believe they had them back then.
  17. bruceb58

    Should we antifoul paint our 1998 SX outdrives?

    A volvo doesn't use that gasket. That looks like an OMC kit. You should be purchasing an OEM u-joint bellow. They changed the design a few years back.
  18. bruceb58

    Ballast resistor getting too hot to touch

    You need a ballast resistor to the coil. That's the only place you need one.
  19. bruceb58

    1988 OMC Cobra 3.0L engine revs/slipping

    A spun prop hub is not the reason your temp got up high. Change your impeller.
  20. bruceb58

    1988 OMC Cobra 3.0L engine revs/slipping

    Sounds like a spun prop hub. A coupler would be all or noting.
Top