Search results

  1. S

    1976 135HP Evinrude No gas going to spark plugs/cylinder

    "Fuel is not reaching the actual combustion chamber" I'm going with this. You changed the gas lines....fuel is non-ethanol? Octane? Did you try pumping the primer ball while starting it. I'd eliminate any fuel issues if the information provided is true. Cheers.
  2. S

    90 hp carb over filling

    One other way to look at it. Did you look at the torque specs for the screws that go in the plastic bowl? You might find.... that you're over torquing them. Cheap to try....
  3. S

    Evinrude 20 Poor Water Flow

    Could be your water jacket has internal damage. What happens when you run it other than nothing peeing? Try running it and seeing if it heats up. If not put a hot alarm on it and run it My IT guy would say...I just went around it.
  4. S

    Lower unit won't drop on a 1987 Johnson 50

    If you did the above, when was the last time it was removed? Every hear of a stuck driveshaft?
  5. S

    No sparking v4

    Mine went bad near the motor where it swivels a lot. No need to open the whole harness, just some spots and test each wire for continuity. Another trick if the harness is already exposed is dig your thumb nail along the wire....it usually squishes in where the brake is.
  6. S

    383535 vs 311932

    "either" Don't assume anything.
  7. S

    383535 vs 311932

    Either measure everything and I mean everything or chase out the threads. Not sure why you even purchased one. Next, weld shop and re-thread. Send the head back as defective.
  8. S

    383535 vs 311932

    Did you try to chase the thread out using a tap with lots of oil spinning it back and forth? Because if you did, and it didn't work then I usually, if the head is actually off, have my welders spot shot some aluminum in there and then I drill and tap it out. Easy peasy.
  9. S

    Trolling motor OMC Pt# 116063 replacement

    I have a left hand spinner.....I call it "the red headed stepchild". Hope she runs!
  10. S

    Help with installing throttle cables

    Rifle around in here.... https://www.marineengine.com/parts/johnson-evinrude-accessories/index.php?year=1975
  11. S

    Top speed??

    Well said....or a 15 cap on it.....smaller restricted plate, bad fuel, coil cutting out at high power, kill switch slightly killing it at high speeds or a tiny tiny speck of sand in the main jet.
  12. S

    Trolling motor OMC Pt# 116063 replacement

    Cro's, the right and the left, in the USA, haven't been talking for years. Or maybe that's all they do! 🤣😝🤣
  13. S

    Evinrude 120 v4 no spark

    Do you have a big red plug?
  14. S

    No sparking v4

    Got $100? That will probably fix it if you learn how to diagnose. Try deductive reasoning.
  15. S

    Gas - Oil Mixture on old Evinrudes outboards

    Yes, I can make just about any 2 stroke outboard run excellent on 100 to 1. And I have a 63 brass British Seagull that runs on 16 to 1. I just really thought, starting them once and then hang them on the wall and maintain them is WAY more fun the running them around at high speeds. I believe...
  16. S

    Gas - Oil Mixture on old Evinrudes outboards

    If your just idling around just use very little oil (100 to 1) If you want to rip around use 16 to 1.... Otherwise use 0 to 1 and put them on the wall. Years of staring at them will do you wonders.
  17. S

    2007 e-tec 250 lower mount corrosion

    😆😆😆
  18. S

    2007 e-tec 250 lower mount corrosion

    If it fits??? Marry her?
  19. S

    Top speed??

    Aye yai yai, this website is still not perfect!!!
  20. S

    Gas lines

    He didn't mean old geezer....he ment it's going in the old freezer! When you were at Napa did you happen to pick up a filter? I strongly recommend it you may even want a gas mask.
Top