Search results

  1. E

    1968 mercury 200 20hp stop switch

    Rude9109, I researched the forum for this identical stop switch problem in my 1968 Merc Mdl 60 6Hp motor and found your old question. The posted answers to your question are truncated so I can't read what the complete answers. Do you remember what the solution was? The 2 stator ground leads...
  2. E

    1968 mercury 200 20hp stop switch

  3. E

    1968 Mdl 60 6Hp - Stop switch mystery

    Desperate for some clarity. I am unable to find a circuit diagram or write up for the wire routing for my 1968 mdl 60 6 Hp Merc STOP switch in either my Merc service manual or my Seloc manual. I am more than surprised at this oversight. I'm not the original owner and the OEM stop switch...
  4. E

    1968 Merc 6 Hp Mdl 60 Stop Sw Wiring

    I cannot find the wiring diagram in the Merc shop manual for the stop switch relative to the terminal block and the two 398-2206 ground leads coming from the stator plate assembly to the terminal block in my 1968 Merc 6 Hp Model 60. Are both 2206 leads supposed to be connected to the same...
  5. E

    1968 Merc 6 Hp Model 60

    There is a small drilled hole (maybe 1/8" dia) on the port side of the gear housing at about the 10 o'clock position near the front. It appears to be design intent as if it were a weep hole yet, I can find no reference to it in the Merc service manual. The alternative is that the hole is the...
  6. E

    1968 Merc Model 60 6.0 Hp Coil and Plug wire

    I am at a loss and cannot find any reference how to detach the plug wire from the 398-2568A1 coil No mechanical release is apparent and I am afraid to just pull on it. Does some one know?
  7. E

    Flywheel thread sizes for puller

    My 1968 Model 60 6.0 Hp flywheel needs pulling. I cannot determine the 1/4 inch thread number for the 3 puller attachment holes. They don't seem to be 1/4 20 or 1/4 28. Are they something else? I don't want to force bolts in there and risk cross threading. Someone must know?
  8. E

    Running on One Cylinder

    After wasting countless hours focusing on fuel issues and replacing/rebuilding everything in the fuel system in my 1968 Mdl 60 6 hp 2 stroke/2 cyl Merc to fix a chronic lack of power at WOT, all of which failed, thanks to Racerone, I think I am finally pointed in the right direction. However, I...
  9. E

    39082 Fuel Pump

    To answer this Merc #39082 fuel pump Q will likely require someone with vast knowledge and experience. No dealer or any parts retailer or the commonly available repair manuals can answer my issue, not even Merc in Fon du Lac could! There is an error in the info Merc has made available to the...
  10. E

    Check valve

    I have a 1968 Merc Model 60 (6 Hp) motor. In the parts list for the fuel pump besides the customary gaskets and diaphragm (ref: 21-22974A-3) are 2 "check valves". What are their function and what would be the symptoms if they were malfunctioning or shy?
Top