Search results

  1. G

    97 Johnson Venom 225 head torque

    I was wondering what the torque is on the head bolts. Also does the gasket need a sealant? If so what should I use? Thanks
  2. G

    Repairing rotten floor

    I have a 97 Stratus 201 PE bass boat. The floor had a few soft spots and when I removed the carpet the wood was real bad. I cut out all the bad wood and need to install the new piece of wood. I have a support on the left side but the right side support is about 4 inches to the right. No...
  3. G

    79 Merc 150 starter issue

    I have a 79 Merc 150. Sometimes when I try and start it all I get is a click. I have to open the cowling and spin the starter drive assy (part that engages flywheel with teeth) so it is closer to the flywheel. After I do this it turns over without issues. Is my starter going bad?
  4. G

    Lower unit leak

    I have a 79 Merc 150 that has a lower unit leak. The oil is leaking near the prop and I think it's the prop shaft seals. Does the carrier have to be removed to change these? Also what other seals should be changed if I drop the lower unit. Thanks for any info.
  5. G

    Lower unit swap

    I have a 79 Mecr 150 and going to buy a lower unit from a 1999 225 optimax. Will this bolt to my engine without any issues? Thanks
  6. G

    79 Merc 150 engine problem

    I was out today and noticed when i gave it throttle it was like a clutch was engaging and the boat would not go anywhere. Like a bearing is spinning durig throttle. What could this be?
  7. G

    79 Merc 150 cold starting

    I have a 79 Merc 150 that won't start when cold without me squirting pre-mix in all carbs. I apply 2 squirts per carb and the engine starts right away and will start all day on it's own. I changed the reeds which someone told me was the problem. What do you think I should try next? I pump the...
  8. G

    Where to buy a 79 150 Merc Chock Solenoid

    I need one of these. Where can i get one?
Top