Search results

  1. alldodge

    Axius repair on used boat Cobalt 303

    That would be a good idea, provide them engine and PCM numbers In post 2 you listed your serial numbers but when I look up 1A437598 it comes back as invalid at mercruiser parts, and comes back as a Bravo drive at Mercury site
  2. alldodge

    4.3L TKS running issue

    My guess without knowing more its your Oil pressure switch Crank the motor and power goes to fuel pump and fills carb. Motor is running and key is released so now "IF" the oil pressure sensor re-powers the FP then it continues to run. The oil pressure switch is not making contact so it runs...
  3. alldodge

    2005 5.0 GXI Volvo penta crank but will not start

    You thru a bunch of parts at it but have you done any testing? What is your fuel pressure? It's a 5.0 GXI what?
  4. alldodge

    How does this pin come out?

    The pin has broke/rusted off. Use a drift punch and drive it out
  5. alldodge

    Axius repair on used boat Cobalt 303

    I don't know, MUC might Could be they are good and only if your on your side of the pond they can be seen
  6. alldodge

    Axius repair on used boat Cobalt 303

    You did post the PCM numbers prior, I just missed it Both part numbers show up on Mercury Parts, but neither show any motor listed for them, 8M2015889 has no superseded part number, 8M0031299 shows a prior number of 8M0071570 and list PCM 14.
  7. alldodge

    Axius repair on used boat Cobalt 303

    Has the PCM part number been verified it's the correct one? Reading it shouldn't work with Axius removed, wonder if they were changed out I'm finding 879194T17 for 377 Mag, closed cooling Axius
  8. alldodge

    Exhaust Manifold question

    Had EMI on my cruiser for many years in fresh water, no issues.
  9. alldodge

    Noise from out drive when giving it throttle

    It's a 4.3L according to your other post Sounds like fan blades hitting something, like maybe the alternator
  10. alldodge

    Active Corrosion Unit

    Welcome Normally those are done with a nut driver
  11. alldodge

    Maybe my turn for new boat time

    Thanks, there is about 2.5 ft including splash well, but when lounger is folded out there is maybe 1 ft
  12. alldodge

    Maybe my turn for new boat time

    Once it gets real hot we probably won't spend much time under the shade, be more time floating in the water and under the trees
  13. alldodge

    98 seedoo GTX issues

    Wish I had more ideas, been a long time since I had a RFI and only thing I had to replace was the rectifier
  14. alldodge

    Maybe my turn for new boat time

    We really like it, spent better then an hour just reclining on the longer and enjoying the view. The sade is a Boca shade and works very well
  15. alldodge

    Maybe my turn for new boat time

    Could but not us as yet, but things could change
  16. alldodge

    Maybe my turn for new boat time

    Might have come up with a name for the boat, The Rose It's part from our original wedding vowels, some from her Mom, and some from the song lyrics. Not much room on the stern for the name and graphics but we will work it out if it sticks
  17. alldodge

    Maybe my turn for new boat time

    The Admiral and I had a great day today just floating. Time in the water and then more time on the lounger. Life is good and the boat is turning into a really nice place for us more so then the cruiser Now if she could just find what car she want's to replace the current one. Last time it...
  18. alldodge

    2008 moomba shaft

    Someone at the factory or dealer didn't align the shaft to trans coupling correctly. It should be adjusted to 0.003 or less. My guess its probably closer to 0.010 The cutlass bearing will wear out over time if not fixed
  19. alldodge

    Bravo 3 Shifting Issue

    If cables do move, remove the back off the upper section (should drain lube a bit down first) and see if the latch is moving the shift lever and clutch cam
  20. alldodge

    Merc 60 EFI Fluctuating motor speed at any speed, air in fuel filter

    No expert on OB's (just bought 2 new ones) but might contact Merc customer service to ask why your having issues with the fix? While they may not "want" to acknowledge there is an issue with a dealer, it will be documented there is a problem
Top