Search results

  1. S

    What to use on failed weld on an aluminum hull crack

    I started by grinding down the blob of weld and getting two 48" patches of 5052 cut and bent to the angle of the hull runners. It took some time but I finally found a well-reviewed welder that was willing to do the job. It definitely was not an easy task he had, but he turned a real mess into a...
  2. S

    What to use on failed weld on an aluminum hull crack

    What to use on a failed weld on an aluminum hull crack? This is a 1982 Bass Tracker by Sea Nymph. Two 12" welds on the same seam lasted for 4 years, but after a second attempt to fix another leak in between, the aluminum is just too far gone to do it right. My friend and welder was chasing...
  3. S

    1994 40HP Evinrude - Hit rocks, what to do first.

    Only and certainly is myself to blame but my spotters directed me over a large rock and it clipped my skeg and aluminum prop as I was running at WOT on the river this weekend trying to get back to camp in gusting winds. I am figuring the lower unit is shot, but I was hoping at the least I could...
  4. S

    Used '94 Evinrude 40HP, seller ran 40:1, OB has 100/100 psi, should I decarb?

    Thanks for reading. I drove a ways out of town to pick up a great 1994 40 HP Evinrude. She purs like a kitten and pisses like a racehorse. The compression test result was 100/100 psi, dead even on both cylinders. I understand many engines run at lower than 100 psi but it is at the lower end of...
  5. S

    Converting from 60HP Remote to 40HP Tiller, Thoughts Please?

    Thanks for reading. I own a 1982, 16'4" Sea Nymph by Bass Tracker. Originally purchased for $500, I reconstructed the interior and the 60 HP Evinrude outboard had given me a great 6 years before I finally had some catastrophic powerhead damage last year. Finding a replacement powerhead has...
  6. S

    1983 evinrude 60 hp cylinder damage and repair options

    I'll start by thanking anyone willing to give me honest advice in my outboard dilemma. This site has helped me several times and I do appreciate it. I have a 1983 Evinrude 60 hp that quit running after the water pump unknowingly went out at WOT. It definitely overheated as the buzzer wasn't in...
  7. S

    1982 Evinrude 60 HP carburetor float bowl mount screws loosening

    Thanks in advance for any help. My 1982 60HP evinrude started bogging down this weekend at WOT. After taking off the engine cover with the outboard running at idle, I noticed a large volume of gas leaking from the bottom of the carburetor. It turns out, 1 of the 4 screws that mounts to the...
  8. S

    1982 Evinrude Power Trim - Doesn't trim up but works down

    Hello all, In advance, I see how helpful you all are in other posts and I really appreciate any advice I may get on my problem. I have a 1983 bass tracker with a 60 HP 2-Stroke Evinrude. To my knowledge, everything is original 1983. My power trim has slowly become unresponsive when I trim...
Top