Search results

  1. I

    where to find one

    im looking for a wire harness (on power head) for a 1969 johnson 55 hp model number55esl69a serial number j3000666. any sugestions where to find a new or used one. thanks in advance
  2. I

    through hull exhaust

    i have a 302 ford, omc stringer. can i run my exhaust through the hull and cap off the holes in the bellhousing -intermidiat where they exhaust tubes go now?
  3. I

    190 omc stern drive help finding parts and info

    i have an omc stern drive,190 hp,electric shift boat is a 78 avenger w/ 302 motor. im looking for a manual and where i can find the drive gears (the gears you can see if you tip the out drive all the way up). please let me know a good place to get these parts. you can e male me a icwebpeople at...
  4. I

    190 omc stern drive help finding parts and info

    i have an omc stern drive,190 hp,electric shift boat is a 78 avenger w/ 302 motor. im looking for a manual and where i can find the drive gears (the gears you can see if you tip the out drive all the way up). please let me know a good place to get these parts. you can e male me a icwebpeople at...
  5. I

    what prop should i use

    i just bought a 78 avenger ru about,21ft, powered by a ford 302 aprox 188 hp, merc outdrive. it doesnt have a prop, what prop would you suggest using, mostly tubing and cruising fast.also any ideas on what top speed of this boat would be ( v hull)
  6. I

    need a maryland title/registration

    i have a 21ft avenger made by cee bee. i has been stored in my barn for 3.5 yrs. it was left here by a tenant that got up and moved in a hurry. i have no idea who was the last owner that titled it. all i have are the hull numbers and expired md.numbers ans stickers. would love to get it in the...
  7. I

    motor and parts

    Sorry Iceweb.<br /><br />For sale ads are not allowed here.<br /><br />Good luck on Ebay. JB
  8. I

    new to i/o need help identifying

    ive always had and worked out boards now i started a new prodject with i/o.this boat sat since 97<br /><br />its a20 ft renken cuddy. hin # is rbmgm328m81l if im reading it correctly its a 1981.<br />the stern drive has 3 labels 1st says mercruiser 485,the2nd says 5909531, the third one says...
  9. I

    no title

    i bought a boat from a friend who was going to repair it and bibnt. he has no title for the boat. now i need a title to register in maryland. any one tell me a way to get a title?
  10. I

    try these sites for parts

    i hope this helps some of you. if you need more help let me know.<br /><br />icwebpeople@aol.com<br /><br />this is a site listing lots of used parts dealers<br /><br /> http://www.marineengine.com/outboard_motors/parts/ <br /><br />try some of these<br...
  11. I

    here are some places to find chysler and other outboard parts

    Here are some email addresses and contacts I have found and I have bought from a lot of them. If you don’t have outlook express you may have to type the e mail address in your e mail instead of just clicking on it. I would start a the top of the list and go down that’s the order I have had the...
  12. I

    old hard to find parts

    where to find Chrysler outboard parts<br />Here are some email addresses and contacts I have found and I have bought from a lot of them. If you don’t have outlook express you may have to type the e mail address in your e mail instead of just clicking on it. I would start a the top of the list...
  13. I

    oops

    i have a 1978 85 hp chrysler outboard.<br />i removed the shift rod scew when i drained the oil last night and put back in and filled lower unit.then i saw in the manual that it was not the drain hole. it also sayas to put this screw back in you have to lay motor on its side. <br />this morning...
  14. I

    different props

    i have a 1976 14'6" manatee witha chrysler charger 85 hp outboard. it has a 13"by 21"pitch right hand rotation prop.with boat loaded pulls whife and kids on tube and ski but could be a little better out of the hole.<br /> wont get me at 195 lbs out of water on ski very well. flat out it will...
  15. I

    here are some e mail addresses and web sites if you need parts

    i hope this helps some of you. if you need more help let me know.<br /><br />icwebpeople@aol.com<br /><br />this is a site listing lots of used parts dealers<br /><br /> http://www.marineengine.com/outboard_motors/parts/ <br /><br />try some of these<br...
  16. I

    chrysler parts. try these emails or web sites

    i hope this helps some of you. if you need more help let me know.<br /><br />icwebpeople@aol.com<br /><br />this is a site listing lots of used parts dealers<br /><br /> http://www.marineengine.com/outboard_motors/parts/ <br /><br />try some of these<br...
  17. I

    swap skills

    any one live near mount airy md willing to trade my construction and carpentry skills for work on chrysler outbourd 85 hp
  18. I

    chats

    where can i find a live boaters chat
  19. I

    manatee

    im looking for a site or imfo on manatee boats
  20. I

    where to go

    can any one tell me places in maryland to go boating. im new to the area and live near frederick . ive tried deep creek lake and it was nice . im not realy into the bay or ocean thing. small craft and dont like salt water.
Top